Reflow Oven Controller Motherboard for Arduino Pro Micro

Name: Reflow Oven Controller Motherboard for Arduino Pro Micro
SKU: 2805
Price: 15.00 USD
Availability: OutOfStock
Rating: 4.50 (1 reviews)

(1 Review)

Reflow Oven Controller (Motherboard Only) for Arduino Pro Micro – github.com/0xpit

Designed by 0xPIT in Germany

Reflow Oven Controller Motherboard for Arduino Pro Micro 1

Reflow Oven Controller Motherboard for Arduino Pro Micro 2

Reflow Oven Controller Motherboard for Arduino Pro Micro 3

Reflow Oven Controller Motherboard for Arduino Pro Micro 4

Reflow Oven Controller Motherboard for Arduino Pro Micro 5

Reflow Oven Controller Motherboard for Arduino Pro Micro 6

$15.00

Out of Stock

Sold out since Feb 17, 2015

Follow my twitter @0xPIT

Reflow Oven Controller (Motherboard Only) for Arduino Pro Micro – github.com/0xpit

What is it? Arduino-based reflow oven controller with: Note: The Complete Kit comes with a 3.3V-Only Display, you need to add resistors on your own, instructions can be found via google PID lo…

What is it?

Arduino-based reflow oven controller with:

Note: The Complete Kit comes with a 3.3V-Only Display, you need to add resistors on your own, instructions can be found via google

PID loop control
Wave Packet and Phase Fired control for AC outputs
graphic TFT LC-Display, drawing the temperature curves using an Adafruit 1.8" TFT or derivate display
solely controlled using a cheap rotary encoder and it's single button
stores up to 30 temperature profiles in EEPROM
configurable PID-parameters
simple, small hardware to drive loads up to 600V and up to 8A
hardware can measure two temperatures independently
drive two AC loads, such as heater and fan
could also be used for slow cookers

Why did you make it?

I've refurbished a cheap mini oven to solder SMD PCBs

What makes it special?

compared to similar projects, this
actually works
really regulates the temperature accurately
has a graphic display
is easy to use
is made professionally
is completely open and free

No country selected, please select your country to see shipping options.

Change Destination Country:

Review Breakdown

Average Ratings

Product: (5.00)

Documentation: (4.00)

Shipping: (4.00)

Communication: (5.00)

Andreas | March 5, 2015

Very nice designed one board solution

This Reflow Oven Controller works a treat with its onboard triacs and the graphical display. Also the firmware is well done and the UI is handy with all the desirable functions. Soldering and wiring it needed a bit of back and forth between the schematics and PCB layout to figure out the placement of the parts and connections, but in the end it was all clear. 0xpit is a very friendly guy with helpful tips and tricks to get the thing up and running (I was unlucky with a bad power supply, causing errors with the temp readout).
I can only recommend this module for anybody looking for a good Reflow Oven Controller. Review Image