USB Serial Adaptor (FTDI 3.3v)

Name: USB Serial Adaptor (FTDI 3.3v)
SKU: 15187
Price: 10.50 USD
Availability: InStock
Rating: 4.75 (1 reviews)

(1 Review)

FTDI 3.3v UART to USB Adapter

Designed by 8086 Consultancy in United Kingdom

2018-10-20T19:29:23.743Z-USBSERIAL3-1.jpg

2018-10-20T19:29:23.743Z-USBSERIAL3-2.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Due to GPSR I'm no longer shipping to the EU or Northern Ireland.

FTDI 3.3v UART to USB Adapter

USB Serial Adaptor (FTDI) Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access. Using jumper wires it can be used to access the s…

USB Serial Adaptor (FTDI)

Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access.

Using jumper wires it can be used to access the serial on a Raspberry Pi and for Arduino programming (using RTS for reset).

We use through hole connections on both micro USB and female 6 way 0.1" header for a more robust product over the surface mount alone.

Pinout	Description
RTS	Request to send
RX	Receive (connect to remote TX)
TX	Transmit (connect to remote RX)
3V	3.3V supply (50mA max)
CTS	Clear to send
GND	Ground

This board can only be used with systems using 3.3 volts, connecting to those using higher/lower voltages may result in damage.

To enable serial console on a default Raspbian (or Cluster HAT) installation add "enable_uart=1" to your config.txt in the boot partition.

An FTDI FT234X IC is used in the adapter. "Virtual COM port (VCP)" drivers are available on ftdichip for many operating systems, the required kernel module is automatically loaded on recent Linux installations.

No country selected, please select your country to see shipping options.