Arduino Pro Mini 8 Mhz 3.3V with LoRa Module
Designed by M2M Shop in Thailand
Buy with confidence.
Our Tindie Guarantee protects your purchase from fraud. Learn More
What is it? DIY LoRaWAN Node KIT. It is easy to program by using Arduino IDE. Select board as a Arduino Pro Mini and processor to be 3.3V 8Mhz. Can connect to TTN (www.thethingsnetwork.org) using ABP…
Read More…DIY LoRaWAN Node KIT. It is easy to program by using Arduino IDE. Select board as a Arduino Pro Mini and processor to be 3.3V 8Mhz. Can connect to TTN (www.thethingsnetwork.org) using ABP or OTAA authentication. TTN with Cayenne Integration will allow you easily monitoring your Pro Mini sensor node. Access to our Cayenne Example code Click. What include in this kit is shown on the first picture. The other pictures are for illustrative purposes or building idea only.
If you want to learn how lorawan work and would like to make LoRaWAN node by yourselves, you can save your time by using this Kit.
Easy for you to get started with LoRaWAN technology. You can build a loRaWAN Node with this KIT. Small in size.(63x32mm)
!Important! Put the right jumper on FTDI to supply 3.3V (Default from Factory is 5V) Supply 3.3V regulated voltage to 3V3 pin or raw input voltage (4V-12V) to RAW pin.
Soldering Step 1, you might solder 6 pins female header on the top side of PCB. Don't forget to put the 2P male header inside the Pro Mini area (A4,A5 Pin).
We will send you an Arduino Pro mini ATmega328 (3.3V, 8Mhz) which is a clone product from china.
One 10 cm. long antenna that correspond with your selected freq. (Antenna might look difference from the showed picture.)
For FTDI, make sure you put a right jumper on FTDI. The correct Voltage is 3.3V.
You can also generate source code for a few sensors by using the sketch generator Click Here
Select "Continuous sense/Cycled send" After all options are selected, you can click generate. Cut and Paste the program and save as .ino extension.
Open sketch file and Change pin mapping to:
.nss = 10,
.rxtx = LMIC_UNUSED_PIN,
.rst = LMIC_UNUSED_PIN,
.dio = { 4, 5, 7 },
Arduino IDE Config
Select board Arduino Pro or Arduino ProMini
Select Processor ATmega328 (3.3V, 8Mhz)
LMIC Library There are many LMIC Libraries for Arduino or ATmega MCU Platform. All of them are forked from IBM LMIC (LoraMAC-in-C) library.
Select one of these:
If you want to use GPS module, you might have the following lines in your sketch:
include SoftwareSerial.h
SoftwareSerial gpsSerial(2, 3)
LoRa Module main Chip is H RF96 or SX1276.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Arduino Pro Mini LoRaWAN Kit can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
Shipping Rate | Tracked | Ships From | First Item | Additional Items |
---|---|---|---|---|
:
|
Quantity | Price |
---|---|
1 | $28.00 |
2-4 | $27.00 |
5-9 | $26.00 |
10+ | $25.00 |
Buy with confidence.
Our Tindie Guarantee protects your purchase from fraud. Learn More
$3.50
Free Shipping!
$21.00
Free Shipping!
$18.00
Free Shipping!
$40.00
Free Shipping!
$30.00
Free Shipping!
$38.00
Free Shipping!
$16.00
Free Shipping!
$3.50
Free Shipping!
By clicking Register, you confirm that you accept our Terms & Conditions
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!