Nerve Center - DIY Eurorack Mixer

Name: Nerve Center - DIY Eurorack Mixer
SKU: 20056
Price: 80.00 USD
Availability: OutOfStock
Rating: 5.00 (1 reviews)

(1 Review)

The Nerve Center Eurorack Module is a 10HP, easy to build and adaptable mixer able to meet any of your mixing needs.

Designed by CCTV in Canada

2020-05-13T21:57:10.725Z-00000PORTRAIT_00000_BURST20200508165725653-01..jpeg

2020-06-10T17:28:50.034Z-mixerRENDER-square-01.png

2020-05-13T21:57:10.725Z-00000IMG_00000_BURST20200513145139144_COVER-01..jpeg

2020-05-13T21:57:10.725Z-00000IMG_00000_BURST20200508165744794_COVER-01..jpeg

2020-05-13T21:57:10.725Z-00000IMG_00000_BURST20200508165714588_COVER-02..jpeg

2020-05-13T21:57:10.725Z-WIN_20200508_13_47_53_Pro-02..jpeg

2020-05-13T21:57:10.725Z-00000IMG_00000_BURST20200508165753686_COVER-01..jpeg

$80.00

Out of Stock

Sold out since Aug 20, 2023

The Nerve Center Eurorack Module is a 10HP, easy to build and adaptable mixer able to meet any of your mixing needs.

The Nerve Center Eurorack Module is a 10HP, easy to build and adaptable mixer able to meet any of your mixing needs. It can be a 4:1 mono mixer, two 2:1 stereo mixers, individual attenuators, or any …

Review Breakdown

Average Ratings

Product: (5.00)

Documentation: (5.00)

Shipping: (5.00)

Communication: (5.00)

Brad | Aug. 24, 2021

Easy build, great result

Great documentation, attention to detail in kit assembly, and some extra screws included in case one flies off into the void. I presume some of these are for the rails on your rack? It's thoughtful of you regardless, and convenient that the thread pitch matches the other screws in the design.

All I could suggest would be:
- DIP sockets for the opamps on the 'backpack' board
- maybe a smidgen bigger pads for the ceramic capacitors
- one of the faceplate screws (on the fader board solder side) was a little hard to tighten with the daughter board already installed - but it does tighten itself through the standoff if you turn from the front-facing (faceplate side) screw instead. Perhaps consider making the daughter board a mm or two skinnier, this would allow the hex key/phillips screwdriver more clearance.

Overall, very satisfied. Thank you!

$80.00