A breadboard-compatible USB Type-C Plug breakout board, only breaks out the USB 3.0 pins.
Designed by Solder Party in Sweden
Buy with confidence.
Our Tindie Guarantee protects your purchase from fraud. Learn More
This breakout board provides an easy way to extract signals and power from a USB Type-C Receptacle. By default, the CC pin is connected via a 5.1K resistor to GND (-), meaning the plug identifies as …
Read More…This breakout board provides an easy way to extract signals and power from a USB Type-C Receptacle. By default, the CC pin is connected via a 5.1K resistor to GND (-), meaning the plug identifies as a downstream port, and the upstream port will provide up to 1.5A at 5V. You can replace or move the resistor to pull the CC pin to VBUS (+) or change the pull value.
The 3.0 variant of the breakout board contains only two SuperSpeed differential pairs (RX2+/- and TX2+/-), meaning only single-lane mode is available.
As per the USB Type-C specification, the plug has only one pair of D+/D- pins; it's up to the Receptacle to connect them together or use a mux for more advanced scenarios. Similar with CC and VCONN pins. The SBU pins are not available.
For more details about USB Type-C, we recommend this application note or the USB Type-C Specification.
Buy with confidence.
Our Tindie Guarantee protects your purchase from fraud. Learn More
$12.00
$3.00
$4.50
$5.50
$2.75
$3.00
$6.50
$30.00
/i/24465/products/2021-01-20T23%3A20%3A46.603Z-KAB_9260_2.JPG?1611156063)
