Pico Super Starter Kit

What is Raspberry Pi Pico? Raspberry Pi Pico, which is powered by the 32-bit Arm Cortex M0+ based RP2040 processor developed by the Raspberry Pi Foundation, stands out with its 133MHz speed.

When we look at the input and output pins, 2 I2C and 2 SPI ports that we can assign to the pins we want will provide great convenience while performing complex projects. Thanks to the temperature sensor on it, it will be very easy for us to do projects such as a weather monitor.

Raspberry Pi Pico can be programmed with both C/C++ and MicroPython. This gives us flexibility in programming. MicroPython is more preferred in Pico projects as it is easier to code and understand compared to C/C++ languages.

10+! PROJECTS IN ONE PACK

Weather Monitor In this project which you can do using a 16x2 LCD, you will learn how to instantly monitor the temperature data you receive from Pico.

Button Controlled LED Push buttons are components that allow us to physically interact with the circuit. In this application, you will learn how to blink a LED using a button.

Burglar Alarm You can detect movements with the PIR sensor and make a motion alarm. If the system detects motion, it will respond by ringing the buzzer and turning on a light.

Distance Detection With this project, where you will use the HC-SR04 ultrasonic sensor, you can calculate the distance without contact.

COMPATIBLE WITH THONNY IDE Pico can be programmed by both MicroPython and C/C++. MicroPython is especially a preferred language because it is more easy.

Raspberry Pi Pico can be programmed with MicroPython language using Thonny IDE.

MANUAL BOOK SUPPORTED Pico Starter Kit comes with a manual. In the manual, the list of all parts of the kit, circuit building steps are explained with visuals. The codes of the projects are also in this manual.

We made many improvements in the manual with the feedback we received. When you buy the kit, it comes absolutely with the manual book.

Kit Contents:

Starter Kit Consist of 27 Components The List of Components : 1x Raspberry Pico w/Soldered Headers 1x Micro USB Cable - 1.5 m 1x Breadboard 1x 40 Pin M-M Jumper Cable 1x 40 Pin M-F Jumper Cable 1x BC547 - TO92 Transistor 3x 1/4 W Resistor Pack 4x 5 mm Led Pack 1x 10K Potentiometer 1x 5mm LDR 1x HC-SR04 1x 16*2 LCD (I2C) 4x Push Button 1x 1 Channel 5V Relay Module 1x LM35DZ 1x Buzzer 1x IR Receiver Transmitter Control Kit 1x Sound Sensor 1x 3-6 V DC Motor 1x DHT11 Temperature and Humidity Sensor