What is it?

This is our "official" beginning SMT soldering kit, with a practice are for several sizes of components, and a blinking circuit made with all 0805 components.

Why did you make it?

With our official learn to SMT solder kit you will be able to practice soldering different sized components ranging from 1206 all the way down to 0402. We also included mini-melf and SOD-323 diodes. There are "practice stalks" that have some grounded pads to give you some experience soldering to pads with heat sinking. The 0805 components are part of the circuit along with two dual 555 timers and an inverter which create 5 different blinking rates. We've included a bunch of different colored LEDs so you can choose whichever colors you want for your flowers!

What makes it special?

Not only does this board come with 8 different practice stalks it also has a circuit that lights up LEDs.

What's in the kit?

• 10 - Practice capacitors 1206, 0.1 uF
• 10 - Practice capacitors 0603, 100nF
• 10 - Practice capacitors 0402, 0.1 uF
• 10 - Practice resistors, 10 ohms, 1206
• 10 - Practice resistors, 1.00k, 0603
• 10 - Practice resistors, 10.0k, 0402
• 10 - Practice diodes, SOD-80 mini-melf
• 16 - Reverse-polarity protection diodes and practice diodes, SOD-323
• 5 - Red LEDs
• 5 - Orange LEDs
• 5 - Yellow LEDs
• 5 - Green LEDs
• 5 - Blue LEDs
• 25 - 1.00k ohm resistors for red, org, yel, grn, blu LEDs, 0805
• 6 - 10M ohm resistors, 0805
• 2 - 22M ohm resistors, 0805
• 3 - 4.7M ohm resistors, 0805
• 5 - 0.1 uF / 100 nF ceramic chip capacitor, 0805
• 8 - 0.01 uF / 10 nF ceramic chip capacitor, 0805
• 2 - Dual 555 timers, SO-14
• 1 - Inverter, SO-14
• 1 - USB Mini B thru
• 1 - Magnetic standoffs, set of 4 with screws
• 2 - CR2032 batteries
• 1 - CR2032 dual battery holder
• 1 - PCB

Scan the QR code on the back of the card your PCB is attached to for soldering instructions or go to Hackaday.

Made by PCBWay