Diskio Pi, the screen for all your medium/large format display projects !

This tablet is pre-assembled and delivered as a kit, or fully assembled. The SBC board (i.e Raspberry Pi) is not included in the kit.

• Compatible with nano PC boards with up to 8 GB RAM (ARM, x86, x64)
• Can be used as an external screen (adapter and flat cable in option), touch via USB
• Up to 8 hours of battery life (Raspberry Pi 3B)
• Fully hackable, scalable, and customizable device

A scalable screen :

• Add a fan and temperature sensor (optional)
• Replace batteries if they are worn out
• Add your own cards, sensors, according to your needs
• Add specially designed boards by 3DCRAN (SATA to USB3 coming soon)

• Etc. In the box :

• Display and eDP flat cable x 1

• Video controller board with OSD board and cable x 1
• Touch screen with USB controller card x 1
• PETG x 1 case
• Cooler / Fan (optional)
• Multi-SBC plate and nylon spacers x 1
• Daughter board x 1
• Ethernet board x 1 (micro SD flat cable available on www.diskiopi.com)
• 12000 mAh 7.4V battery with charger board v1.2.1 and cables
• Internal cables compatible with Raspberry Pi (1, 2, 3 B/B+ 4), Odroid C1+, C2.
• Internal flat cable and connectors for HDMI x 1
• AC/DC power adapter with EU, UK or US cable x 1
• Screw set and a small screwdriver x 1
• Installation instructions x 1

Dimensions & nomenclature :

Device specifications

Screen

• Brand : Innolux / IVO / BOE
• Size : 13.3 inches
• Resolution : 1920*1080 px
• Surface treatment : Glossy
• Type : TFT[IPS]
• Luminosity : 300 cd/m2 (Typ.)
• Visualisation angle : 85/85/85/85/85/85
• Contrast Ratio : 800:1
• Signal interface : eDP 30 pins
• Lamp Type : WLED
• Structure : G/G (glass/glass)
• Technology : capacitive, 10 points
• Interface : USB 2.0
• Hardness : ≥6H

Daughter board

• Genesys Logic USB 2.0 Hub x3 (external 2x + internal 1x)
• Buck convertor 9V to 5V@4A (Power circuit)
• Temperature regulator (with fan/sensor in option)
• Connections with SBCs by cable : (USB, Ethernet, power, HDMI).
• USB 2.0 output to use touch glass with an SBC or external computer
• External HDMI Input

Ethernet board

• Simple expansion card, unshielded Ethernet connector without LED
• 3.5 mm stereo audio jack connector
• SD card reader (flat cable available on diskiopi.com)

Display controller board

• HDMI 1.4 convertor to eDP
• Stereo DAC via HDMI, class D stereo amplifier (1W)
• Speakers : 2 x 1W
• "Portable screen" function: Internal HDMI cable (in option).

Power adapter - AC/DC (9V-3A) with EU, UK ou US plug (with more delay)

External inputs/outputs

• 2x USB 2.0 output (500 mA)
• 1x 9V plug
• 1x HDMI in
• 1x USB 2.0 in
• 1x USB 2.0 (4A) power output

Batteries

• Battery charge / decharge / balancing circuit (2S3P), with :
• 6 LiPo cells (7.4V, total 12000mAh)

Size of the device

• Width : 335 mm
• Height : 240 mm
• Max. thickness : 35 mm
• Min. thickness : 12 mm

Weight of the device - With 6 cell battery : 1800 g

Case material - Matte PETG (3D printed)

Warranty The warranty is 24 months for all parts, except for wearing parts (e.g. battery packs), which are guaranteed for 6 months. We only replace the defective part. In the case of the screen, if the reference no longer exists, we replace it with a close reference and new compatible bracket.

Find our options on www.diskiopi.com

Find the manuel assembly on PDF format