This little module plugs into an power distribution block that many people (especially amateur radio operators) use to distribute 12 volt power. It provides 5 volt regulated output through a pair of screw terminals. What makes this utility board so useful is that it has the PowerPole connector right on the pcb. No pigtail wires necessary.

The board has linear regulator, a power status LED, and a re-settable PTC fuse.

This includes:

• The PCB with all surface mount parts soldered
• One screw terminal (you solder to board--keeps shipping down)
• This DOES NOT INCLUDE the PowerPole connector. You provide that and solder it.