Jim | March 20, 2022

If you have a LitePlacer then you want this!

For TMC2209 TinyG upgrade for LitePlacer & OpenPNP.

Amazing improvement to the motor control of the LitePlacer. I don't even hear the stepper motors anymore. Gone is the ringing and buzzing when the machine is idle. I also bought this to help with the migration to using OpenPnP, since it has jumpers to swap the inputs of the Z limit switches. Assembly was very easy and the instructions are very good. Be sure to buy the PCB with the SMD components already soldered, very much worth the small extra cost.

Response from IR AnalysIR-Infrared decoder & anlayzer OCXO 10Mhz | March 20, 2022

Hi Jim
Thanks for the feedback & glad it all worked out for you.

Aaron | Feb. 23, 2022

Great Product worked exactly like I'd expected

For Resistance Decade Substitution Box Kit

It took me a couple of selectors to figure out the 'easiest' method for me to solder on the resistors.
It works great, I think I need to find new connection wires to reduce the impedance they add, as mine is at 1.6ohms zeroed out.
I like that instead of a bunch of knobs to read and add up, its a quick read for exactly what I've set the resistance to.
Everything I'm looking at doing needs mega Ohms or greater, so I don't see an immediate issue/need to resolve it.
There was no project box available when I purchased mine, so I designed one that can be 3d printed for those with that capability. You can find that over at thingiverse as thing:5260681.

Response from IR AnalysIR-Infrared decoder & anlayzer OCXO 10Mhz | Feb. 24, 2022

Cool, thanks for posting the box on Thingiverse.
(already added to my collection!)

Marko | June 24, 2021

Great addon for a low price... just minor issues

For TMC2209 TinyG upgrade for LitePlacer & OpenPNP.

Hi,
I bought this upgrade to make my Liteplacer more silent and less hot.
WORKS!
The full set has been shipped fast to Germany.
The Wiki page helps to build it.
Good: The SMD Parts has already be soldered, so get not just the PCB, but with all parts.
Worth every cent, do not buy PCB only.

The only minor downsize: The add on board does not align to the original mount holes,
so mechanical some work (3D printing, or hot glue) is required.
But: The electrical connection are well done.

Thanks for supporting the comunity.

Marko - Germany

Response from IR AnalysIR-Infrared decoder & anlayzer OCXO 10Mhz | June 25, 2021

Hi Marko

Thanks for the kind words & glad you like it.

Regarding the mounting Holes: When designing initially for my own setup, I had envisioned using zip ties to supplement the Header mounts. In the end, I felt that additional mounting support beyond the headers was not required (for me). However, for the next rev of the PCB I will look into this further to see if it can be enhanced.

David | March 31, 2021

A useful, good quality product. Highly recommended.

For Extender/Riser boards for 5345A & similar testgear

The boards were of very good quality and exactly as described. They worked well for troubleshooting my HP3586A.
I would guess there are many more HP instruments with which they could be used. I thoroughly recommend this product.

Response from IR AnalysIR-Infrared decoder & anlayzer OCXO 10Mhz | March 31, 2021

Hi David

Thanks for the feedback, muck appreciated. It is good to know that it works with the HP3586A SELECTIVE
LEVEL METER. I hope any repair goes well.

Graham Arthur | March 17, 2021

Good.

For 10MHz OCXO Frequency Standard Module or Kit

As described, does as expected. Using as replacement oscillator in counter and does the job very well. Recommended.

Response from IR AnalysIR-Infrared decoder & anlayzer OCXO 10Mhz | March 17, 2021

Hi Graham, Thanks for the feedback & glad you liked it. :)