ESP8266 Wifi Module

Name: ESP8266 Wifi Module
SKU: 3490
Price: 8.80 USD
Availability: Discontinued
Rating: 5.00 (1 reviews)

(1 Review)

An affordable WiFi module for microcontroller projects.

Designed by BBTech in Taiwan

Product Retired

This product is no longer available for sale.

The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.

While you're here, check out these other awesome products for sale!

More From Arduino

Rabbit-Labs™ - Flux Capacitor - Amplified CC1101

Rabbit-Labs™

$49.22

Louder ESP32

Sonocotta

$24.00

Rabbit-Labs™ - Multi Pass MagSpoof Flipper Board

Rabbit-Labs™

$33.60

TC4+ Coffee Roaster Shield - TC4 PLUS

Artisanal Technologies

$59.00

Thank you for visiting our tindie store! we introduced a variety of unique electronic parts, hope you like it.

An affordable WiFi module for microcontroller projects.

What is it? Base on Espressif ESP8266. Serial(UART) Interface.(115200bps 8N1) Reserve Half-hole Solder Joints the Edges of the Board: GPIO12 ~ GPIO15. (3.3V only) Device PIN Description: PIN1: GND. …

What is it?

Base on Espressif ESP8266.
Serial(UART) Interface.(115200bps 8N1)
Reserve Half-hole Solder Joints the Edges of the Board: GPIO12 ~ GPIO15. (3.3V only)
Device PIN Description:
- PIN1: GND.
- PIN2: Power 5V Input.
- PIN3: Power 3.3V Output / Input.
- PIN4: TXD. (output voltage level 3.3V)
- PIN5: RXD. (input voltage level 3V ~ 5V)
- PIN6: chip enable pin. (input voltage level 3V ~ 5V, default: always enable, controllable via jumper).
- Pin to Pin Pitch: 2.54 mm / 0.1 in.
Antenna Type Optional:
- Onboard Ceramic Antenna.
- uFL Connector.
5V Safe and Ultra-low Power Consumption, <30uA @CE_Pin=RXD_Pin=LOW.
Jump1: Normal / Updating Mode. (Def. Normal Mode)
Solder jumper 2: CHIP_EN Pin Enable. (Default: Disabled. Enable by shorting the #2 solder pad, or connecting pin CE to 3V~5V.
Module Size: 25 x 18 mm.
Fixable half hole, 3mm.
Firmware Version: 0.9.3 / AT Version: 0.2
Change Baudrate At Command: AT+CIOBAUD=9600
Read GPIO14 Status: AT+CIOREAD=14
GPIO14 Output Low: AT+CIOWRITE=14,0
GPIO12 Output High: AT+CIOWRITE=12,1

Review Breakdown

Average Ratings

Product: (5.00)

Documentation: (5.00)

Shipping: (5.00)

Communication: (5.00)

Kenn | Dec. 30, 2014

Good device and good support for the ESP8266

Not only is the ESP8266 wifi module tiny and efficient, but the support was rapid and good. Bbtech was very open to feedback on their documentation and did a great job of improving the diagrams and wording. I bought another two modules based on my experience, and would recommend it to others.