This is a new version of the Sharp Memory LCD breakout with new features (and a great new price)! Please read the details below.

This board is designed to interface Sharp's Memory LCD’s to microcontrollers. These LCDs operate at 3.3v - and are not tolerant to 5v inputs. All level shifting is handled on the board - just hook it up to your favorite microcontroller and go!

We now have two options for LCD:

96x96 pixel 1.35 inch LS013B4DN04 model. (mirror effect as seen in the videos)

128x128 pixel 1.28 inch LS013B7DH03 model. (Paper white)

Note - the 128x128 LS013B7DH03 LCD is NOT Arduino Uno / ATMega 328 compatible as it requires more than 2k of memory.

The Sharp Memory LCD boards are built to run either with 5v (Arduino Uno, etc) microcontrolers or 3.3v (Raspberry pi, Arduino Due, etc) microcontrollers.

Please specify which LCD and voltage option you need in the comments section of your order.

You will get the breakout board with the LCD already mounted. All you have to do is solder on your header of choice. These boards are breadboard friendly. They also feature mounting holes, making it easier to mount them in your final design.

See the LCD and breakout in action here

and Here (showing the reflective properties:) http://www.youtube.com/watch?v=1lDsZzq8tLw&feature=plcp

I have written a library for arduino to drive these boards, which can be found at https://github.com/TheRengineer/MemoryLcd