What is it?

This is custom arcade machine based on Raspberry Pi3 with 10.1 inch screen and real arcade controls with Zero delay controller electronics. It has solid 3D printed enclosure with very thick walls (ABS with 100% infill), back power entry for computer style plug, and all power supplies for the raspberry and the LCD are inside the cabinet. The cabinet also includes a large speaker using HiFi I2S DAC from the raspberry. The inside of the cabinet is easy accessible as the cover is magnetic and you can access the inside by sliding the top part. Additional mounting holes exist to permanently close it if you wish.

It comes as you see it on the video. You can add games by plugging an external USB. The system SD card is 32GB, but you can also keep the games on external USB stick up to 128GB. Inside there is a USB HUB you can use to plug a USB stick with games. Its easy to modify it to your needs.

Uses RetroPie - Plays games from the NES, SNES, Genesis, GameBoy, GameGear, Atari, Playstation, arcade games (MAME) and lots of other systems

This 3D printed Arcade Cabinet includes:

• Raspberry Pi 3
• SD 32GB with Retropie already installed setup for the controls and the audio.
• Phat DAC board I2S sound for the Raspberry, already setup to increase or decrease volume using buttons on back.
• 10.1" HDMI display.
• Zero Delay arcade controller with arcade stick and buttons.
• Some Keyboard buttons are setup on the back flat buttons (ESC, ENTER, START, SELECT, Vol UP, Vol Down, Shutdown)
• Mini USB Hub for connecting internally USB stick or other USB accessories.
• 5.2v/2.4A PSU for the Raspberry + 12v PSU for the LCD display and the LED strip on top
• Power entry that supplies mains power to the two PSU with a ON/OFF switch.

Why did you make it?

I really liked to play again some of these older arcade games with same stick and buttons as in old days. Playing these games on the computer does not quite gives you the same feel.

What makes it special?

The vibrant colors of the large screen and the zero delay controls makes it pleasant to play again any of the favorite arcades from your childhood, or you could just add any external USB joystick controller or gamepad to experience some classic console games.

Important Shipping information

This bartop arcade weighs 10lbs (5kg) thus it will be shipped with ground shipping service. Because of the weight its available for shipping only in within USA..