The aconno acnSENSA is a programmable Bluetooth 5 Low Energy Multi Sensor Beacon, which is targeting developers and advanced developers. It comes with a basic reference firmware delivering measurements for the provided sensors:

• Thermometer/ Temperature Sensor
• Light intensity sensor
• Barometer/ Air pressure
• Moisture/ Humidity sensor
• Magnetometer
• Accelerometer
• Full Gyroscope

It comes in a very solid IP65 rated casing together with a CR2450 Battery. Same as all other aconno products it’s featuring a Tag-Connect interface and can be (re-)programmed. e.g. using aconno’s ACNPROG.

Use cases:

• Climate monitoring, measure environmental parameters
• Predictive maintenance, motor vibrations and heat
• Transportation and asset management – track variables in transportation (e.g. cold chain deliverables, tilt, shake, temperature and humidity changes)
• Motion control – gaming applications

Overview:

• Multi Sensor Beacon, BT Smart, Low Power
• Sensors: Temperature, Light, Humidity, Barometer, Accelerometer, Magnetometer, Gyroskope
• Robust, IP65 Casing, CR2450 Battery incl.
• Free Android APP (Open Source) incl. Cloud-connectors: aconno Sensorics
• re-programmable using Tag-Connect

Sensor ranges:

• Temperature (-10 to +85 Degree Celsius)
• Light intensity (up to 1000 Lux)
• Air Pressure (50 kPa to 115 kPa)
• Moisture/ Humidity (0 – 90 % relative Humidity)
• Magnetism (+/- 15 Gauss)
• Angular speed (+/- 2000Grad/s)
• Acceleration (for 3 Axis, +/- 16g)

To make the best out of your experience, use the aconno Sensorics APP, which you can find in the Google Play store. It delivers a real-time view on the sensor data and can act as a gateway to connect to different clouds (Cumulocity, Google IoT Cloud) per MQTT or Rest.

The aconno acnSENSA is based on the aconno ACN52832.

Check out our social channels on Facebook, Twitter, LinkedIn and especially on youtube for more insight!

aconno - Quality made in Germany.

NOTE: because of the high sealing quality of the acnSENSA you will have a higher latency on pressure and temperature. If you want to have better results and also measure moisture, you will need to drill an opening fitting with your needs.