Based on Raspberry Pi Pico, Raspberry Pi Pico W board with pre-soldered header comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 GHZ band, making it the perfect solution for wireless network control and communication.

Key Features:

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom;
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz;
• Onboard Infineon CYW43439 wireless chip, supports 2.4 GHZ Wi-Fi 4;
• 264KB of SRAM, and 2MB of on-board Flash memory;
• Castellated module allows soldering direct to carrier boards;
• USB 1.1 with device and host support;
• Low-power sleep and dormant modes;
• Drag-and-drop programming using mass storage over USB;
• 26 x multi-function GPIO pins;
• 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels;
• Accurate clock and timer on-chip;
• Temperature sensor;
• Accelerated floating-point libraries on-chip;
• 8x Programmable I/O (PIO) state machines for custom peripheral support

About this item

• Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 GHz band, making it the perfect solution for wireless network control and communication.
• 26 x multi-function GPIO pins: configurable pin function, allows flexible development and integration Built-in Wi-Fi: Onboard Infineon CYW43439 wireless chip, supports 2.4GHZ Wi-Fi 4
• Dual-core Arm processor: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• C/C++, MicroPython support: Comprehensive SDK, dev resources, tutorials to help you easily get started

Package List:

1x Raspberry Pi Pico W board with pre-soldered header

1x 3PIN pin header

1x USB Type A to micro cable