Esp32-Stick-PoE-P(8MB)

Name: Esp32-Stick-PoE-P(8MB)
SKU: 30448
Price: 26.00 USD
Availability: InStock

This is an Esp32 development board for DIY projects. It can be powered from an Ethernet cable (using passive PoE).

Designed by Prokyber in Czechia

2023-05-26T15:19:48.133Z-stick-poe-p-shop-pic..jpeg

2023-05-24T12:42:04.803Z-poep_pinout_ver1.png

2023-05-24T14:35:43.114Z-PCB_ESP32-POE-P_ver.1_2022-12-31_dimensions.png

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

This is an Esp32 development board for DIY projects. It can be powered from an Ethernet cable (using passive PoE).

What is it? This is an open-source development board for Esp32 with Ethernet and passive PoE support, which is a part of Esp32-Stick boards line, that was funded on Kickstarter. Why did you make it?…

What is it?

This is an open-source development board for Esp32 with Ethernet and passive PoE support, which is a part of Esp32-Stick boards line, that was funded on Kickstarter.

Why did you make it?

I made it because I often prefer Ethernet over WiFi in my projects. In my humble opinion, Ethernet is more stable and simpler to use(plug and play), using PoE and powering the board via Ethernet cable makes it even more attractive. Standard active PoE uses 48V and requires special adapter. Passive PoE does not require one, and can be powered using cheap PoE injectors. Unfortunately there were no Esp32 with passive PoE support at the market, so I made one:) I also made 2 other versions of this board: Esp32-Stick-PoE-A and Esp32-Stick-Eth, which have the same MCU, dimensions and pinout for projects where you really need active PoE(Esp32-Stick-PoE-A) or don't need PoE at all(Esp32-Stick-Eth).

What makes it special?

Pin-to-pin compatibility with other Esp32-Stick boards and passive PoE support!

Here are other features too:

17 pins are not used by Ethernet are available for programming
USB Type-C
Esp32-Stick-Poe-P has a wide range of input PoE voltages. (9V-57V). With this board you can choose any passive PoE injector you like, it is completely up to your design
Esp32-Stick-Poe-P has 5V 2A output, so you can power a lot of additional periphery.
Esp32-Stick boards are fully programmable in Arduino and are supported in ESPHome home automation environment(Examples are available on Github)
No external USB-UART converter is required, ready for plug-and-play programming!
All the Esp32-Stick boards have the same length and width so they can easily be replaced with one another.
Any code written for one board is compatible with another because they share the same CPU and pinout.