Did you ever dreamed about being able to shoot film that has been used by leading Hollywood directors like Quentin Tarantino? Well, now you can! We respooled the legendary Vision3 500T color negative produced by Kodak, from large 400 ft (122 m) spools into normal 36 frames rolls that you use in your favorite analog camera.

Each roll is properly labeled, and there is leader cut out for your convenience of easy loading. Inside there are at least 36 frames, however please mind that all rolls are made by-hand, so please mind an error margin of +/- 1.5 frames.

Here are a few more details:

ISO / ASA

• 500 (when shooting in environment it by 3200K tungsten light), basically indoors or when shooting at night

• 320 (when shooting in environment lit by 550K light and with 85 filter), basically outdoors

• Base - acetate safety base

• White balance - 3200K to 3400K
• Storage temperature - below 13 C / 55 F
• Reprocity correction - no need for exposure times from 1/1000 to 1 second. Above 10 seconds, increase exposure 1 stop and preferably use CC10R filter.
• Developer - ECN-2 or C-41 after proper RemJet anti-halation layer removal

How do we recommend to shoot this film properly, to achieve best results:

• When shooting outside it's best to use color compensating filter (85A, or 85B) and then set ISO / ASA to 320
• If you don't have a filter, you can compensate for it later in post production software
• If you plan shooting this film with an older camera with TTL meter that you don't really trust, overexpose by one stop

How to develop this color negative:

• Send it to lab that can process it in ECN-2
• Remove the rem-jet layer yourself (recipe for rem-jet removal can be easily found online, or we can send you ours), and then process it normally in C-41
• If you can't find a lab that can process ECN-2, please contact us! We can process it for you in less than one week in professional, ECN-2 dedicated processor.