RGBPIXELs WS2812B compatible modules + JST cables

Name: RGBPIXELs WS2812B compatible modules + JST cables
SKU: 13322
Price: 4.00 USD
Availability: InStock

Dual RGBPIXEL modules with JST connector and optional cable assembly, standalone or daisychained. Works with Adafruit Neopixel Library.

Designed by IR AnalysIR-Infrared decoder & anlayzer OCXO 10Mhz in Ireland

This seller is taking a break until Dec. 31, 2024. Sign up below to get an email when they're back!

RGBPIXELs WS2812B compatible modules + JST cables 1

RGBPIXELs WS2812B compatible modules + JST cables 2

RGBPIXELs WS2812B compatible modules + JST cables 3

RGBPIXELs WS2812B compatible modules + JST cables 4

RGBPIXELs WS2812B compatible modules + JST cables 5

RGBPIXELs WS2812B compatible modules + JST cables 6

RGBPIXELs WS2812B compatible modules + JST cables 7

2018-06-28T20:18:48.271Z-RGBpixel_pinout.png

$4.00

On A Break

We are currently on Vacation until January 2025.

Dual RGBPIXEL modules with JST connector and optional cable assembly, standalone or daisychained. Works with Adafruit Neopixel Library.

What is it? A dual WS2812B compatible module, with on-board JST 5-pin header with 2mm spacing. One of the 5 pins is free and routes to a spare pad on the module. The other 4 pins are for 5V, GND, Da…

What is it?

A dual WS2812B compatible module, with on-board JST 5-pin header with 2mm spacing. One of the 5 pins is free and routes to a spare pad on the module. The other 4 pins are for 5V, GND, DataIN, DataOUT. The modules can be operated standalone with a suitable controller (eg Arduino) or daisy-chained to create an even more exciting project. There is one large and 2 small holes in the centre of each module suitable for use with fixed mounting, suspension or sewing. The male JST connector is mounted on the rear and could be de-soldered to provide a flatter profile, if desired.

When daisy-chaining many modules together, make sure to provide power directly from a dedicated power supply. (not from an Arduino)

Why did you make it?

The module is left over from a previous arcade project.

What makes it special?

It is a compact unit with an on-board JST connector and optional 30mm long JST 5-wire cable.

Options

A: Two(2) RGBPIXEL modules. (Cables not included)
B: Five(5) RGBPIXEL modules. (Cables not included)
C: Ten(10) RGBPIXEL modules. (Cables not included)
D: Twenty(20) RGBPIXEL modules. (Cables not included)
A1: Two(2) Female 5-wire JST cables, 300mm in length
B1: Five(5) Female 5-wire JST cables, 300mm in length
C1: Ten(10) Female 5-wire JST cables, 300mm in length
D1: Twenty(20) Female 5-wire JST cables, 300mm in length

Note: Lengths are approximate (within +/- 5mm)

General Information

The RGB LEDs are WS2812B compatible(see SK6812), and are not original WS2812B parts. Neopixel is a trademark of Limor Fried of Adafruit and we have no association with either party other than being an occasional customer. The central mounting hole is 4mm. (un-plated) Check out the example Source code GitHub link for more information in the README section.