Irrigation Hat, build a Smart Irrigation and Automation system using the raspberry PI capabilities
Designed by Hydrosys4 in ItalySign up to get notified when this product is back in stock!
Still struggling to find the chips to make my boards and sensors, I've found some workaround, so hopefully there will be more boards available soon.
The Irrigation Hat board aims to create a Smart irrigation and automation system using the raspberry PI capabilities. The board is designed to work with the open source software Hydrosys4. With its w…
Read More…The Irrigation Hat board aims to create a Smart irrigation and automation system using the raspberry PI capabilities.
The board is designed to work with the open source software Hydrosys4. With its web interface the system is easy to configure and offers high flexibility to manage the irrigation scheduling , it supports automation functions and sensors data logging, it can send emails with reports and photo of your garden.
On top of it, with its modular design the system can support from 4 to 12 irrigation lines, if compared to other commercial smart irrigation systems, this one can be implemented with a fraction of the price.
The package will include the board as in the picture.
NOTE: Colours of the board may vary. Unfortunately no more colors for the buttons, the only color available now is Black.
The board includes the following parts:
The board is compatible with the Raspberry PI4 , PI3 and Raspberry PI zero W.
The supported Relays board are 5vdc they are commonly available, for the specifications of the relay board connector please refer to the link at the end of this chapter.
The compatible valves are Normally closed type, latching valves are not supported.
The relays can be used to connect valves but also other equipment likes fans, heaters, etc.
Details about the supported hardware can be found here: Link to hardware description
The Hydrosys4 software uses the raspberry PI WiFi and a web interface to configure all the aspects of the system.
To install the Software all you need to know is how to write an .img file on a SD card, here the link to the Hydrosys4 installation and setting guide: SW Installation&Setting
The system implements direct internet connection between your devices and the Raspberry PI, no external servers are involved (unlike almost all the other automation systems in the market).
The system is simple to implement even for non technical people it does not require experience with Raspberry PI, programming and electronics, you need just a little bit of knowledge of how a switch works and how to connect valves to a power supply. In any case, this video might give some useful info: Relays and Valves connection
For a minimum setup with 4 irrigation lines you will additionally need to purchase:
There is a dedicated website and some youtube videos with step by step guide.
For More info you can refer to:
Youtube: introduction to the irrigation HAT board
Youtube: Valves&Relays connection
For more info you can refer to website: Hydrosys4 website
Sign up to get notified when this product is back in stock!
/i/748071/products/2020-06-05T11%3A06%3A14.843Z-front-irr-v9.jpg?1606306133)
