Half-Life 3D Printed Pr Magnusson Device Accessory

Name: Half-Life 3D Printed Pr Magnusson Device Accessory
SKU: 30763
Price: 228.00 USD
Availability: InStock

3D Printing Half-Life Pr Magnusson Device

Designed by ApertureMaker SHOP in France

Half-Life 3D Printed Pr Magnusson Device Accessory 1

Half-Life 3D Printed Pr Magnusson Device Accessory 2

Half-Life 3D Printed Pr Magnusson Device Accessory 3

Half-Life 3D Printed Pr Magnusson Device Accessory 4

Half-Life 3D Printed Pr Magnusson Device Accessory 5

Half-Life 3D Printed Pr Magnusson Device Accessory 6

Half-Life 3D Printed Pr Magnusson Device Accessory 7

Half-Life 3D Printed Pr Magnusson Device Accessory 8

Half-Life 3D Printed Pr Magnusson Device Accessory 9

Half-Life 3D Printed Pr Magnusson Device Accessory 10

2023-06-21T11:00:57.990Z-Pr_magnusson_sticky_b_generator.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part1.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part1_placement.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part2.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part2_placement.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part3.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part3_placement.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part4.jpg

2023-06-21T11:00:57.990Z-Pr_Magnusson_Sticky_B_in_the generator_part4_placement.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

3D Printing Half-Life Pr Magnusson Device

This mini-robot being designed reproduces the behavior of the original Pr Magnusson Device in the Half-Life video game (see video below). Size : 16.85 x 17 x 10.39 cm. Material: Natural Full Color Sandstone. The robotic version is under design and includes: diodes, motor to operate the rotation of the Sticky B generator, a toggle switch, a L293D to manage the motor, an ATTiny85 chip on which I inject C code via Arduino to control everything. Power supply: Lithium battery: 3.3v - Note: the robotic version requires iterations at the 3D Printing level, in electronics (PCB), in code and to implement magnets for the Sticky B. levitation. I therefore sell the non-robotic version to finance the development of the robotic version.

NB : The others pictures explain the different part of the device to assemble for robotics version.