Introduction

AB BLE Gateway V3 (network cable version) is a new BLE to WiFi gateway and bridge based on AB BLE Gateway V2. The gateway reads BLE advertising data such as iBeacon and Eddystone format and sends to local TCP server or internet HTTP/MQTT/WebSocket server. The main difference from AB BLE Gateway V2 is Uplink channel is changed to Web network cable mode from WiFi mode of gateway V2, and support USB power, easy for installation. At the same time it raised the uplink rate because of capability improvement. It will work more reliably in scenarios with high volumes and concurrency. AB BLE Gateway V3 (network cable version) will support device directly docking the Amazon Cloud's IoT service “Amazon AWS IoT”, and IoT Cloud service in China “BaiDu IoT Hub”.

Hardware

• CPU: Cortex-A7 Quad-Core from Quan Zhi H2 ARM
• Memory: 256MB
• Storage: 8GB Micro-SD card
• Bluetooth chipset: Nordic NRF52832
• Enclosure: White case, size is 48mm × 46mm
• Power support: USB micro power

Application

Bluetooth gateway collects environmental data through Bluetooth and upload data through different channels and protocols to the Business Server. Therefore multiple business scenarios can be built.

• Indoor Location
• Parking & Checking in
• Manage and monitor temperature and humidity
• Technical support

Userguide

1. Connect to the network using Power + network, the green light indicates that the network is connected properly.
2. Open the router to find the client connected to the network hostname for Ab_ble_gateway to find the appropriate IP.
3. The browser opens the IP address found in the previous step.
4. Open Abblegateway Login page login username password (default: admin, 123456)

Dashboard

• SERIAL NUMBER
• MAC
• VERSION
• UPLOAD
• CPU TEMPERATURE
• MEM
• SD (Current amount of disk)

WiFi setting

• SSID (network SSID)
• Password ssid (network password)
• Upload setting

Aws setting

• Tap “aws tab” button
• Endpoint aws
• Topic aws
• rootCA aws ca
• Key aws
• Frequency
• Tap “Save” submit to device

Http setting

• Tap “http Tab” button
• Http Host
• Port
• Path
• SSL
• CA
• Cert
• Key
• Frequency

Note: Data will be submited to server through http multipart/form-data, and saved on the body of http protocol, click “save” and reboot the device.

Websocket （wss）setting

• Tap “websocket Tab” button
• Websocket Host
• Port
• SSL
• Ca broker
• Key broker
• Frequency
• Tap “Save” and submit to device

Setting

Set ble rssi filter