Officially Approved Made For ESPHome DC 5V 8-80V Inching/Self-locking Relay Switch

Pre flashed Tasmota latest version, support official OTA. Based on ESP-12FS WIFI module design, works with Home Assitant

enter link description here

1. VCC,GND: 8-80V

2. Micro USB: 5V

3. Reset button

4. UART download: GND/RX/TX/5V of ESP8266 connect to GND/RX/TX/5V of TTL module accordingly, IO0 connect to GND while downloding, disconnect it while download complete.

5. GPIO Pins

6. Output of replay:

NC Normal close NO: Normal open COM:

1. Power LED

2. Programable LED: controlled by GPIO16

9: Relay LED

All IOs available on board,User can connect motion sensor,temperature sensor etc to board directly

Specification:

Operating voltage: 5V/8-80V DC

Two input interfaces

Supports to control different voltage ranges

USB port power supply more convenient

Board consumption: <1W

Standby current: 80mA

Max input current: 10A

Max Wattage: 2200W

Relay lifespan: ≥one million times

100M electrical insulation resistance

Electric shock voltage: 1000V

Relay maximum pull time: 15ms

Relay maximum release time: 5ms

Working mode: inching / self-locking

Wireless Standard: 2.4GHz, 802.11 b/g/n

Application: access control, turn on PC, garage door, etc.

Computer application: Remote control computer boot

Operating temperature: -40 degrees to +70 degrees

Operating Humidity 40%-80% RH

Item Size: 605020mm

Self-Locking Mode

The default setting of this product is Self-locking mode

Inching Mode

To switch self-locking to Inching mode, just go to command line input: PulseTime 1

Inching mode automatically working 1 Sec.

Restart

To restart the board just press the button on the board

Reset

To reset the board, Please use jump wire connect GND to TX for more than 6s and disconnect it. The board will be reset and you need to reinstall it again.

YAML:

https://github.com/athom-tech/athom-configs/blob/main/athom-relay-board-x1.yaml