Pre Flashed HAA Homekit WiFi Switch

Specification:

• Neutral line required
• Input Voltage AC 100-240V 50/60HZ
• Output Voltage AC 90-250V 50/60HZ
• Load: max 600W/gang
• Life Time: 100000 times
• Working Temperature: -20℃~50℃
• Control Mode: APP/Voice/Manual
• Wireless: WiFI 802.11 b/g/n
• Hub Requirement: No
• Size: 118x70x39 mm
• Certification CE, ROHS

How to install Homekit Switch to you Apple Home App

Power on the switch and use your cell phone or computer search WiFi networking until find Athomxxxx SSID and click to link it.

After you connect it, the configuration web will pop up automatically ( If not, please use your web browser visit IP address: 192.168.4.1 , then choose the WiFi router you want to connect (make sure connect to 2.4G not 5.8G)

And input the password of your WiFi

Then click “save” to enable the Switch to connect to your router. After several seconds, the configuration page will disappear and your phone will reconnect to your WiFi automatically

Add Switch to your Home App Open Apple Home APP and click “+” to add accessory Scan the bar code or input the code Press “Add Anyway” , until add it. now you can enjoy your homekit smart life

Troubleshooting

If you add accessory unsuccessful, usually because of input the wrong password. Press and hold the button more than 8 Secs, the Switch will automatically enter config mode again, then repeat the setup until success