Pre flashed Homekit Smart Plug EU/France Standard Material: ABS+PC Voltage: 100-250V 50/60Hz Max. Current: 16A Max. Power: 3520W Consumption Monitor: No Working Temperature: -20℃~50℃ Wireless: WiFi 2.4GHz 802.11b/g/n Hub Requirement: No Control Mode: APP/Voice/Manual Certification: CE, RoHS

How to install ptoduct to your Apple Home App Power on the plug and use your cell phone or computer search WiFi networking until find Athomxxxx SSID and click to link it.

After you connect it, the configuration web will pop up automatically ( If not, please use your web browser visit IP address: 192.168.4.1 , then choose the WiFi router you want to connect (make sure connect to 2.4G not 5.8G)

And input the password of your WiFi

Then click “save” to enable the Switch connect to your router. After several seconds, the configuration page will disappeared and your phone will reconnect to your WiFi automatically

Open Apple Home APP and click “+” to add accessory

Scan the bar code or input the code

Press “Add Anyway” , until add it.

now you can enjoy your homekit smart life

Trouble Shooting If you add accessory unsuccessful, usually because of input the wrong password. Press and hold the button more than 8 Secs , the Switch will automatically enter config mode again, then repeat the setup until success

2M flash build in Standard Tuya/Smartlife plugs build in 1M flash, ATHOM preflashed plug build in 2M flash, easy to upgrade software