2-in-1 0-24mA loop simulator/0-10V generator

Name: 2-in-1 0-24mA loop simulator/0-10V generator
SKU: 10825
Price: 29.90 USD
Availability: Discontinued

2-in-1 0-24mA current loop signal simulator/0-10V voltage generator

Designed by JACK in Taiwan

Product Retired

This product is no longer available for sale.

The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.

While you're here, check out these other awesome products for sale!

Visit Store

More From JACK:

ROGER BEEP - select a tone at the front/end to rad

JACK

$21.90

10 way MIDI Thru Splitter unit for synthesizers

JACK

$58.00

3.5mm mono line mixer - 4x3 Matrix Mixer

JACK

$54.00

6 way Eurorack modular linear power supply

JACK

$35.90

More From DIY Electronics

HackberryPi Cyberdeck Handheld with BB9900 KBD

ZitaoTech

$125.88

Faikin : Alternative Daikin WiFi controller

Elfatronics

$28.00

Bluetooth module VOLVO V50, S40, C30, C70, XC90

JustTech

$84.99

Sale

PWM 16A 3500W Triac Leading EDGE Dimmer 50HZ 60HZ

KRIDA Electronics

$42.00 $46.95

2-in-1 0-24mA loop simulator/0-10V generator 1

2-in-1 0-24mA loop simulator/0-10V generator 2

2-in-1 0-24mA loop simulator/0-10V generator 3

2-in-1 0-24mA current loop signal simulator/0-10V voltage generator

What is it? Powered by a 9V battery, this product is portable! 0-24mA current loop signal simulator (Resolution:0.2~0.3 mA). Here is one inexpensive and very handy tool for testing and simulatin…

What is it?

Powered by a 9V battery, this product is portable!
0-24mA current loop signal simulator (Resolution:0.2~0.3 mA). Here is one inexpensive and very handy tool for testing and simulating your 0-24mA current loop in your control system. This will help you with troubleshooting on any current loop signal device.
With this device now you can. And the way it works it shows what current flows. If your circuit is broken (loop is not closed) then it will display zero. When loop is closed it will display how much flows through the circuit. In other words it is a generator and a meter in one unit.
0-10V voltage generator (Resolution:0.1 Volt) This will help you to do troubleshooting on any 0-10V signal device. Examples: PLC inputs, VFD, DC motor drives, I/P pressure regulators, flow control valves and list can go on… The most important thing; it is simple and easy to use. Turn knob clockwise to turn it ON and continue in clockwise direction to increase output value from 0 to 10 volts. It has precision of 1/10 of 1 volt.
Full range of 24mA at load resistance of up to 500 ohms.
Accuracy: ±2%
Size: 15x6x3 cm