This listing is for

1. Mini Dual Power Supply (+12V/-12V)
2. AC/AC adapter
3. 8 x Eurorack Power Connectors on a compact board.

Mini Dual Power Supply (+12V/-12V)

Features

• Two LEDs.
• Two Resettable Fuse (500mA) on +12V/-12V output.
• For European makers only, the AC/AC adapter

What is a Mini Dual Power Supply?

This is your small linear filtered and regulated Dual Power Supply, from a simple AC (Wall Wart) adapter. It's able to deliver positive and negative voltages (+12V and -12V for example) on its output if you supply an AC voltage on its input connector. It's a good choice for your small Eurorack skiff, your LushOne or any op-amp project that needs a dual and symmetrical power supply.

AC/AC adapter

This AC/AC adapter will output 15V AC at 1A (1000mA) max.
You can choose EURO mains sockets, 220V, 50Hz rated.

8 x Eurorack Power Connectors in a compact board.

• 8 Position, 16 pin Eurorack Power Bus Board, (Gate, CV, +5, +/-12, GND).
• Terminal block for power connections.
• PCB Size: 98mm x 56mm

This board only needs + and - 12 V power supply. +5 V is generated by an onboard linear regulator. Screw Terminals are versatile and make it easy to connect to any power supply.

3 rail visualization LEDs show you if there's energy on the rails, and with the correct polarity.

It can hosts 8 x Keyed Eurorack 16-pin (2 x 8) connectors with 3 LEDs for Voltage Rails visualisation. Input is done by two Screw Terminal connectors or by Eurorack 16-pin connector (as in a chained bus topology).

The product needs to be assembled and soldered by yourself.