Here's a dedicated enclosure I designed for : NanoVNA V2 Plus/ SAA-2 / S-A-A-V2 / Nano VNA 2 with 2.8" screen.

One piece remaining, black color.

What's included the bundle :

• Two piece enclosure with cleaned supports
• (optional) 2000 mAh LiPo battery, with 2.54mm JST header, matching polarity
• 2.54mm header extenders cut to the propper height
• x8 2.5mm 6mm screws
• x4 2.5mm nuts
• x4 2cm brass standoff
• x1 1.5mm hex allen key
• x1 screen protector
• x1 double tape for the battery

Note that documentation is provided to the PDF format at the bottom of this page. This case design is unique, and I'm proud of my design choices :

It can accommodate a large enough battery and internal stylus fitting Have no visible screws on the top and bottom of the case Tight fit, stays compact, and easy to assemble Leds for battery level on the bottom have a dedicated slot.

The enclosure is 3D printed at home with 0.4mm nozzle /0.15mm Z height/normal speed to preserve details.

This also means that quality control is done in house. Shipping in Europe as a letter to save on shipping cost. In case of shipment damage, it will be replaced.

I offer to print it with textured or smooth bed. Textured is more rugged and scratch resistant. If you prefer the shiny look of a smooth bed, I'd still suggest a textured bottom.

If you liked the product, don't hesitate to mail me picture of the VNA in use ! :) I'll upload them here.

Sometimes some prints doesn't turn out perfect but are still very usable. Instead of throwing them out, I will message you with a picture of the defects if your order matches a print I already made, and will offer a discount.

Note I : The LiPo battery is shipped in a plastic bag and is equipped with a protection board (discharge and reverse current). LiPo batteries are lightweight and high capacity. However LiPo are also more fragile than other forms of batteries. Please ensure that the battery is well taped in the enclosure. If the battery manages to detach (never happened AFAIK) please re-attach it and don't let it move freely as it could damage itself over time. If you never manipulated LiPo batteries, be aware that the grey plastic wrapping is a protection for the battery's elements, and it should NOT be removed in any case. If you observe that the battery inflated, it should be disposed according to your country's regulations.

Note II : The VNA electronics must be bought separately. Picture with the assembled VNA is for demonstration only.

If you have any questions, feel free to contact me @ BlueNeonTavern@gmail.com