ESP-R8-POE-3C Automation Controller

Name: ESP-R8-POE-3C Automation Controller
SKU: 25453
Price: 150.00 USD
Availability: InStock

ESP32-based controller PCB (designed for ESPHome)

Designed by BMOREAutomation in United States of America

2023-10-17T19:16:39.669Z-photo_front_1.png

2023-10-17T19:11:52.419Z-photo_front_2.png

2023-10-17T19:11:52.419Z-3drender_top.png

2023-10-17T19:11:52.419Z-3drender_bottom.png

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

ESP32-based controller PCB (designed for ESPHome)

Now comes with an onboard USB-serial chip for your convenience, so all that is needed for firmware flashing is a USB cable. The ESP-R8-POE-3C is an ESP32-based automation controller board suitable fo…

Features

IEEE 802.3at PoE+ or 12 volt DC power input
12 volt DC fused 750mA auxillary output, making it possible to power 12 volt devices such as motion detectors, sirens, or electric door locks using PoE power alone
8 relay output channels
8 dry-contact input channels
2 GPIO terminals with built-in configurable 4.7kΩ pullup resistors
Battery-backed real time clock (DS1307)
10/100 full duplex Ethernet or 802.11b/g/n Wifi
SMA connector, allowing for the use of commonly available Wifi antenna equipment
Expansion header for custom projects
ESD protection on all inputs, including Ethernet connector
ENIG finish

Includes

BPI-7402 PoE power module
Wifi antenna
CR1220 3v coin cell battery

This board comes with ESPHome firmware preinstalled, and it is assumed that it will be modded and/or replaced with your own. Information for things such as GPIO expander, I²C addresses, and Ethernet PHY connections are in the setup guide on my Github repository.