PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock

Name: PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock
SKU: 19338
Price: 14.99 USD
Availability: InStock

PCB board for 6 digit tube clock

Designed by Bobricius in Slovakia

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 1

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 2

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 3

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 4

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 5

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 6

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 7

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 8

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 9

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 10

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 11

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 12

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 13

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 14

PCB for 6 x VFD (IV-3, IV-6) tubes arduino clock 15

2020-07-19T21:19:14.150Z-mainvfd6xiv3.JPG

2020-02-12T10:11:56.804Z-7627281581458183024.jpg

2020-02-12T10:11:56.804Z-9263711581458338576.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Have you seen my other products? What you think? Your idea will be included in the next version! Fell free to write me. Anyway, your purchase or contribution via www.patreon.com/bobricius will help.

PCB board for 6 digit tube clock

You receive BARE PCB no components, one board is for 6 VFD tubes ..!!!!! PICTURE IS FOR REFERENCE ONLY !!! Tested only with IV6-tubes NOTE!!!!: more IV-3 versions with different pinout !!! IV-3 Confu…

NOTE!!!!: more IV-3 versions with different pinout !!!

IV-3 Confusion ...

AXIRIS IV-6 Shield for Arduino is super great project, specially power supply is very good designed. etc. filament is driven with AC voltage which is recommended for VFD. 12V input voltage is 3x multiplied to make about 32V I am redesigned board for easier soldering, all components are in lines with same value

added buttons for HOUR / MINUTES
speaker driver for make alarm clock, in current firmware is only hour beep implemented
components values on PCB
DS3231 with battery backup CR1220
Enhanced to 6 DIGIT
hand painted curved traces for more retro look
all outputs are marked on pcb for better debugging
schematic is almost unchanged, some pins are swapped for better PCB routing

I created simple CLOCK arduino sketch (firmware)

Required parts list IV‐3/IV-3a/IV-6 shield for Arduino (BOM )

1/4W subminiature carbon THT resistors

Pcs	value	Description
1	510 Ω	Ø1.8x3.2mm
2	1K	Ø1.8x3.2mm , tube light, optional
1	2K7	Ø1.8x3.2mm
1	3K9	Ø1.8x3.2mm
14	10K	Ø1.8x3.2mm
14	68K	Ø1.8x3.2mm
14	100K	Ø1.8x3.2mm
14	220K	Ø1.8x3.2mm

CERAMIC/MKT /MKM CAPACITORS

Pcs	value	Description
1	2.2 nF	-
1	100 nF	-
2	8.2 nF !!!	I am replaced with 100nF

ELECTROLYTIC CAPACITORS

Pcs	value	Description
4	22 µF 50V	-
2	100 µF 25V	-

DISCRETE SEMICONDUCTORS

Pcs	value	Description
1	1N400x	rectifier diode
4	1N5819	schottky diode
6	LED 3mm	Tube bottom light (choose color freely) , optional
14	BC547B	NPN transistor
14	BC557B	PNP transistor
1	BC639	NPN “power” transistor
1	BC640	PNP “power” transistor

INTEGRATED CIRCUITS

Pcs	value	Description
1	ICM7555	timer IC (must be CMOS version, do not use a standard 555 !)
1	DS3231	RTC chip , optional

CONNECTORS & OTHER PARTS

Pcs	value	Description
1	Arduino UNO	or clone
28	header	spacing 2.54 mm
1	CR1220	Lithium battery , optional
1	CR1220 socket	Battery holder , optional
6	tube	IV‐3/IV-3a/IV-6 VFD tube
2	switch	angled, Microswitch TACT
1	Piezo 17mm	buzzer, optional