IN STOCK: Elecrow <- Ship world wide

Example application:

• Programmer adapter for PicoPD

• Android Auto. Allow injection of USB-C PD charging cable while maintaining Android Auto connection in modern automobiles.

Note: To maintain signal integrity, the recommended data path length is equal to less than 6ft (1.8 meters). An example is a 3ft + 3ft cable. The board is rated for 5A current. Awareness of longer cabling will result in a higher voltage drop across the setup.

Recommend cable:

• 3ft Anker Powerline USB A to C
• 3ft Anker Powerline USB C to C
• 3ft Anker Generic USB C to C

Design:

• Combined port: All signal
• From Power: VBUS, GND, CC1, CC2 (VBUS and GND support 5A)
• From Data: GND, D+/D-
• Mounting hole: M2

Case material: PETG - Good up to 70C or 158F for automotive use in a mild summer month.

There are also 2x 5.1K termination resistors on CC1/CC2 of the Data port to trigger 5V from the host if required. However, this 5V will not be passed through the Combined port.

List of tested devices:

• Samsung S23/Ultra
• Samsung S22/Ultra
• Samsung S21/Ultra
• Samsung Galaxy S20+
• Samsung Galaxy S10
• Samsung Galaxy S8
• iPhone 14
• iPhone X

This adapter will not work with iPhone 15 or 16

Note: Due to the design of the USB-C Receptacle. You might have to rotate the Power plug to have a connection. Do not mix 5A cable and 3A cable for PD, this can cause your 3A cable to fail if pulling too much current.

Customer photo: