This is an updated version of the module from JACK Enterprises! Now under new management with permission, since he's stopping production.

A similar, but more energy efficient and lower latency module is offered in the PAW3370

This sensor board offers all the needed components to implement the Pixart PMW3389DM-T3QU high end gaming sensor. High speed motion detection up to 400 IPS.

Features:

On-Board voltage regulator
Fully assembled and tested
3.3V or 5V compatible (Vin voltage sets I/O voltage levels. Tolerates 1.8V up to 5.5V)
Resolution : up to 16,000 CPI (50 CPI step size)
Lift detection (manual or 2mm-3mm setting)
Angle snapping
Speed/Acceleration : 400ips/50g IPS/50g
Illumination : Integrated IR LED
Focusing Lens included
Works with Arduino SPI library
Efficient Interrupt based operation

Applications:

Corded gaming laser mice
Optical trackballs
Motion input devices
Robotics

Pinout:

MISO = MISO
MOSI = MOSI
SS = Slave Select / Chip Select
SCK = SPI Clock
MT = Motion (active low interrupt line)
RST = Reset
GND = Ground
VIN = Voltage in up to +5.5V

Dimensions:

Board Size: 28mm x 21mm
Screw holes: 24mm between centers
Screw hole size: 2.44mm (fits 2-56 screw)
Height: 9.25mm

FAQ: Teensy wiring:

VI = 3.3V
MI = MISO0 -or- DIN
MO = MOSI0 -or- DOUT
SC = SCK0 -or- SCK
SS = CS0 -or- CS
MT = Pin 0
GD = GND

Due to the sensitive nature of electronic boards and chips, returns are not accepted. All sales are final.