Build your own dosimeter with the unique "My First Dosimeter" electronic Kit!

Explore the world of radio electronics with a practical guide of building a portable Geiger counter. Simple soldering, fun assembling and firmware with the Arduino IDE, and endless possibilities are waiting for you, limited only by the characteristics of the Wemos D1 controller and you imagination.

The kit is suitable for both beginners who want to ramp up the level of soldering and learn how to interact with microcontrollers, as well as for advanced users looking for new ideas and projects. Warm up your soldering irons, let's get started!

Educational Kit "My First Dosimeter" will help to learn:

• The history of dosimetry
• General concepts of electrical circuits
• Electronic components soldering methods
• The design of microcontrollers and methods for their programming
• Environmental parameters monitoring and researching options

Eco-monitoring is one of the developing areas in robotics. It allows you to learn everything about the state of the environment without leaving your home: from temperature to radiation, from CO2 to airflow velocity. The Educational Kit might be your first step into an eco-science and give you an understanding of how does the process of collecting and analysing environmental data work.

Kit benefits:

• Ready for use out-of-the-box;
• Bright contrast display;
• Easily rechargeable battery;
• Loud speaker;
• Easy-to-assemble housing;
• Updated firmware.

The Electronic Kit will be a great gift for a child from 10 years old, a teenager and an adult. Young engineers and scientists under 14 are advised to use the kit with the help of adults.

Kit content: development board CG_RS_EDU v1.0 - 1 pc., Wemos D1 mini controller - 1 pc., dosimeter board CG_RadSens - 1 pc., Geiger-Muller tube SBM-20 - 1 pc., charging board TP4056 - 1 pc., OLED screen 1.3" 128*64 - 1 pc., board with transistor - 1 pc., bipolar transistor - 1 pc., diode - 1 pc., piezo emitter - 1 pc., resistors 100 kOhm - 2 pcs., 1 kOhm resistors - 2 pcs., 47 kOhm resistor - 1 pcs., 18650 battery box - 1 pc., 18650 battery - 1 pc., JST 2P connectors - 2 pcs., JST 4P connector - 1 pc., 4P cable - 1 pc., cable 2P - 1 pc., straight pin connectors 8P - 1 pc., angled pin connectors 3P - 1 pc., switch - 1 pc., body parts - 8 pcs., fasteners - 33 pcs.

To assemble the kit you will need: screwdriver, soldering iron, wire cutters, flux, solder.

Detailed assembly instructions are available via the QR code printed on the board label and flyer.

RadSens EDU assemble videoguide

https://www.youtube.com/watch?v=cnNHFM9p35A