Duo DS2413 1-Wire Dual Channel Addressable Switch

Name: Duo DS2413 1-Wire Dual Channel Addressable Switch
SKU: 6823
Price: 15.00 USD
Availability: InStock
Rating: 5.00 (1 reviews)

(1 Review)

ClosedCube Duo DS2413 1-Wire Dual-Channel, Addressable Switch Features Open-Drain, Programmable Four (4) I/O Pins Breakout

Designed by ClosedCube in United Kingdom

Duo DS2413 1-Wire Dual Channel Addressable Switch 1

Duo DS2413 1-Wire Dual Channel Addressable Switch 2

Duo DS2413 1-Wire Dual Channel Addressable Switch 3

Duo DS2413 1-Wire Dual Channel Addressable Switch 4

Duo DS2413 1-Wire Dual Channel Addressable Switch 5

Duo DS2413 1-Wire Dual Channel Addressable Switch 6

2016-03-11T11:34:27.116Z-B205_DS2413.jpg

2017-05-25T18:27:31.979Z-205.DS2413_Schematics.jpg

2017-05-25T18:27:31.979Z-205.DS2413_Board.jpg

2016-03-11T11:34:27.116Z-B205_DS2413_Top.jpg

2016-03-11T11:34:27.116Z-B205_DS2413_Bottom.jpg

2016-05-10T10:59:06.818Z-B205_DS2413_PreSoldered_RightAngle.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

ClosedCube Duo DS2413 1-Wire Dual-Channel, Addressable Switch Features Open-Drain, Programmable Four (4) I/O Pins Breakout

The DS2413 is a dual-channel programmable I/O 1-Wire chip. The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V. Control and sensing of the PIO pins is performed with a dedicated device-level command protocol. To provide a high level of fault tolerance in the end application, the 1-Wire I/O and PIO pins are all capable of withstanding continuous application of voltages up to 28V max. Communication and operation of the DS2413 is performed with the single contact Maxim 1-Wire serial interface. The breakout board is populated with two DS2413 ICs.

Features:

Controls Dual Programmable High Voltage, High Current I/O Port Pins from a Single Micro Port Pin
Open-Drain Programmable I/O Pins Support 20mA max Continuous Current Sink
28V (max) PIO Pin Operating Voltage
On-Resistance of PIO Pulldown Transistor 20Ω max; OFF Resistance 1MΩ min
Parasitic Power Supply Through 1-Wire
Communicates to Host with a Single Digital Signal at 14.9kb or 100kbps
Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
1-Wire IO Pin Supports 28V Absolute Maximum DC Level for Fault Conditions
Unique 64-bit ROM Serial Number Factory Lasered Into Each Device
High ESD Immunity of 1-Wire IO Pin: 8kV HBM Typical
Wide Voltage 2.8V to 5.25V and Temperature Operating 0°C to +70°C Enables Robust System Performance