New Xtreme VGA adaptor for all Amiga computers..just choose your model :-)

Xtreme FEATURES

• The best Amiga RGB-VGA adapter on the WEB..with original D-SUB DB23 female
• Exclusive design for the smallest Amiga VGA adaptor available on the Web...only 2.5cm!!
• With Xtreme takes less desk space behind AMIGA
• With Xtreme you can choose Sync position! (V+H or Csync for OSSC/GBS8200 application)
• Don't forget that I'm using only REAL DB23 female connector!

ATTENTION--> other sellers who sell adapters with the same purpose are proposed but the photos are artfully set to not show that the connector is a DB25 PIN cut!

Xtreme adapter version available

• Xtreme unbuffered-LC version for A500 / A500+ / A600 / A1200 (without sync selection,fixed with standard V+H)
• Xtreme unbuffered version for A500 / A500+ / A600 / A1200 (with sync selector, V+H or Csync)
• Xtreme buffered version for ALL AMIGA COMPUTERS (with sync selector, V+H or Csync)

COMPATIBILITY

This adapter allows you to connect a VGA/SVGA* or Multiscan monitor to your Amiga RGB port. This adapter allows you to use the following display modes:

DBLPal DBLNTSC Euro 36Hz and 72Hz Super72 Multiscan/Productivity VGA Only

IMPORTANT NOTE: *SVGA monitor must be able to sync the Amiga's 15Khz signal (most CRT monitors have no problem doing this). Some LCD monitors such as DELL U2410 or BENQ BL702A sync down and support 15Khz- check your monitor specifications for more information. If your monitor does not support 15KHz, then you will not get a picture until the software drivers are installed and workbench is loaded.