ESP32 Dev Board WiFi+Bluetooth

Name: ESP32 Dev Board WiFi+Bluetooth
SKU: 9053
Price: 9.95 USD
Availability: InStock
Rating: 4.33 (10 reviews)

(10 Reviews)

ESP32 Dev Board WiFi+Bluetooth with Si Labs USB to Serial. Arduino Programmable Made in the USA

Designed by EzSBC in United States of America

This seller is taking a break. Sign up below to get an email when they're back!

2017-12-11T01:01:09.086Z-BreadBoardr.jpg

2018-01-07T20:40:06.601Z-EZsbc_ESP32_Pinout.jpg

2017-02-27T18:56:25.958Z-ESP32 Setup2.PNG

2018-04-17T15:44:19.828Z-Esp32D_r03-00.jpg

$9.95

On A Break

ESP32 Dev Board WiFi+Bluetooth with Si Labs USB to Serial. Arduino Programmable Made in the USA

Here is the new revision of my ESP32 development board. A few issues were fixed and the price is now a lot lower. Still made in and ships from the USA. Other than the ESP32 module it has an Si Labs…

Review Breakdown

Average Ratings

Product: (4.40)

Documentation: (4.20)

Shipping: (4.50)

Communication: (4.20)

David | Feb. 18, 2023

Ordered 2, Only Received 1, Seller went silent

I ordered two of these boards but only one arrived. I attempted to contact the seller but they have gone silent.

Norbert | May 12, 2021

Excellent board

Using the board to build a weather station, I had previously tried a standard ESP32 board, but it drained the battery in only 4 days.
With this board it is possible to have a truly interesting autonomy.
WiFi range is really significant, I didn't try the bluetooth.
Icing on the cake, I received the board only one week after order, but I am in Europe !

Claus | Feb. 23, 2021

Low current deep sleep board

I bought this board after searching for an affordable low power consumption board during deep sleep. This test was promising: https://github.com/grillbaer/esp32-power-consumption-test, and the board delivers. With 5.2V of battery input I get 53mA wake and 10.6uA deep sleep consumption. With an efficient external 3.3 V power supply also purchased here at tindie (https://www.tindie.com/products/makertronika-labs/olmboard-tps62840-ulp-buck-converter-60na-iq/) I could get even better 37.3mA wake and 8.3uA deep sleep current. With these values a battery powered device is certainly feasible.

The RGB LEDs are nice to have, and the board is breadboard-friendly. The fonts of the silk are too small for my eyes, I just have a look at the pinout diagram and count pins ;) A good board for a great price! Maybe a LiPo connection with charger would be a great addon, if you can maintain the low power consumption.

Jean-Marc | Feb. 25, 2020

Ordered 2, arrived quickly in Switzerland, work like a charm

The two boards arrived quickly, they worked well and are very handy with breadboards. The 4 available leds (1 blue and 1 RGB) will simplify show simple status during development (so far I had to blink one at various rate).
The schematic is not totally up to date apparently, but this is documented in a note.
You find the ports of the LED in the pinout and the schematic.
Much better that the chinese boards for development so far.

Mark | July 19, 2019

Nice ESP32 board w/RGB LED, and auto-load WORKS!

I'm just learning to use ESP32 after plenty of experience with Arduino. I bought some cheap ESP32 boards from Amazon but the auto-load function did not work, requiring me to press two buttons in sequence for every code upload. I found this Tindie board auto-loads every time. Also, it provides an RGB LED that's nice and bright and very useful. Beware though, this board has 40 pins unlike the typical 38 pin design, and it's 2.3" long instead of 1.9", so you'll have to roll your own case design.

Peter | Sept. 7, 2018

Great product!

The ESP22 board was delivered very fast. The boards are just perfect and the idea to integrate two 2 RGB LEDs directly on the board is just brilliant. All the boards I received work without flaw :-). I would definitely buy more products from this provider!

Vishnu | June 2, 2018

Works Fine

I had been looking for some breadboard friendly ESP32 breakout boards and this one proved to be one of the best. The PCB is compact and of good quality. But the silkscreen could've been better. It's difficult to read the pin names printed on the PCB. I like the RGB LEDs and the smaller CP2104. But one thing I did not like is the push-buttons. They're easily breakable and one of the boards I bought came with a damaged push button. But I can fix that. But my suggestion is to use a better push-button probably with metal covering. I bought three of these boards in a single order and thanks to the seller, he sent me ESP32 revision 1 boards.

Michael | May 9, 2018

highly compatible

I'm using this with Lobo Micropython and it loads and runs well. It seems to be compatible with WROVER based boards. Would like extra SPIRAM for heap space.

Charles-Henri | March 15, 2017

Amazing

Bought 2 of them, dual RGB Led, 2 switches and a clean and cheap board made in the US, schematics and source code available, this is so great

you can go ahead!!

Mike | March 12, 2017

First time using the ESP32 with zero problems

This is my first time using an ESP32 board and getting this little dev board working couldn't be easier. The install IDE instructions are easy to follow, it came with a schematic and led blink example sketch. I've installed it in IDE v1.8.0 and everything compiled and uploaded fine. No need to press any buttons on the board. Shipping was surprisingly fast and inexpensive as well.

+ Show 5 more

$9.95