Tuner for Eurorack system
Designed by Electronic things... and stuff in FranceThis seller is taking a break until April 16, 2025. Sign up below to get an email when they're back!
Sign up and we'll send a reminder when the seller returns!
What is it? The Tuner is a direct implementation of the tuner sub-circuit proposed by LMNC in his amazing Performance VCO. The open source firmware can be found at https://github.com/dhaillant/Tune-…
Read More…The Tuner is a direct implementation of the tuner sub-circuit proposed by LMNC in his amazing Performance VCO.
The open source firmware can be found at https://github.com/dhaillant/Tune-O-Matic.
Check https://lookmumnocomputer.discourse.group/t/tune-o-matic-tuner/36 for discussions around the circuit.
The firmware has been improved, and base frequency as long as accuracy level can be set in code.
This module use an Arduino Nano. It is responsible for both calculating the tuning and displaying the result.
The 7 segment display can be either Common Cathode (CC) or Common Anode (CA) and the jumper S1 selects which type of display is installed.
The 4 jack sockets are passively connected. This way, you can insert your signal on any connector, and get 3 (passive) outputs. So, even if you don't use the tuner feature, the module can still be used as a simple 1 to 3 passive multiple.
The PCB comes with pre-assembled SMD components. You only need to solder the few remaining through-hole components such as the power connector, the display, the LEDs, the Arduino connectors and the jack sockets.
The module is 3U (Eurorack), 4HP wide, 30mm deep with an Arduino Nano.
Power requires +12V only at 65mA.
Visit https://www.davidhaillant.com/tuner-1-0/ for more informations.
You can find Tuner on ModularGrid
Sign up and we'll send a reminder when the seller returns!
$3.50
$6.00
$95.00
$46.00
$5.50
$27.00
$180.00
$12.00
/i/90072/products/2024-04-20T14%3A18%3A31.915Z-2024-03-05%2011.43.46%20detour.jpg?1713597563)
