Product Description：

• 4.0-inch IPS full-angle display, support HDMI input, refresh rate up to 60FPS
• The physical resolution is 800x480
• Raspberry Pi monitor with touch control (need to install touch driver)
• It can be used as standard HDMI output device for computer display(no touch function)
• Compatible with and can be directly inserted into all versions of raspberry PI motherboards (raspberry PI 1 generation B and Zero need additional HDMI cable)
• Support HDMI audio output, backlight brightness adjustable

Product Parameters

• Screen Siz: 4.0inch
• LCD Type: TFT
• Module Interface:HDMI
• Resolution:800*480 (Pixel)
• Active Area:51.84x86.40(mm)
• Touch Screen Controller:XPT2046
• LCD Driver IC:NT35510
• Backlight:LED
• power consumption :0.16A*5V
• Working temperature（℃）:-20~60
• Module PCB Size: 98.60*58.05 (mm)
• Package Size: 14313451 (mm)
• Rough Weight(Package containing) (g):126 (g)

Hardware Description

• ① 3.5mm Headphone Jack: Output audio signal
• ② HDMI：Used to connect the main board and LCD display for HDMI transmission
• ③ Micro USB：Get 5V Power from USB, If ⑤-13*2 Pin Socket has been connected, that this USB interface can be No Connect.
• ④ Backlight adjustment button: Short press backlight change 10%, long press a few seconds to close backlight; short press to open backlight
• ⑤ 13*2 Pin Socket：Get +5V Power from raspberry Pi to LCD, at the same time transfer touch signal back to Raspberry Pi.

Dimension drawing

How to use as PC Monitor

• Connected the computer HDMI output to the LCD HDMI interface by HDMI cable.
• Power to Micro USB interface
• If you have multiple monitors, please pull the other displayer, and make this LCD as the only displayer for testing.
• As computer monitors, the touch function will not be available.