LG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, Or 3G/4G cellular via optional LTE module. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

LG01-N has rich internet connection method such as WiFi interface, Ethernet port and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to Internet.

LG01-N can supportLimited LoRaWAN protocol in single frequency and customized LoRa transmit protocol. Different from LG01-P/LG01-S, LG01-N use the Linux to directly control the sx1276/sx1278 LoRa module which increase the communication efficiency and simplify the software design.

LG01-N can be used to provide a low cost IoT wireless solution to support 50~300 sensor nodes.

Except LoRaWAN mode, LG01-N can support mutiply working mode such as: MQTT mode, TCP/IP Client mode to fit different requirement for IoT connection.

LG01-N base on sx1276 solution which provide a low cost for your IoT network connection. Compare to the cost with normal SX1301 LoRaWAN solution. the LG01-N is only of its 1/4 or less cost. This make the LG01-N very suitable to set up small scale LoRa network.

*Limitation of LoRaWAN support please refer section 3.6.2 of this link:enter link description here

For Private LoRa Protocol, Not recommend for LoRaWAN use.

System Overview

LG01-N

Features

• Open Source OpenWrt system
• Low power consumption
• Firmware upgrade via Web
• Software upgradeable via network
• Flexible protocol to connect to IoT servers
• Auto-Provisioning
• Built-in web server
• Managed by Web GUI, SSH via LAN or WiFi
• Internet connection via LAN, WiFi, Or 3G/4G via optional LTE module
• Failsafe design provides a robust system
• 1 x SX1276/SX1278 LoRa module
• Limited support in LoRaWAN/ Support Private LoRa protocol
• Support upto 300 nodes
• LoRa band available at 433/868/915/920 Mhz
• Max range in LoRa: 5~10 km. Density Area:>500m

Applications:

• Wireless Alarm and Security Systems
• Home and Building Automation
• Automated Meter Reading
• Industrial Monitoring and Control
• Long range Irrigation Systems
• GPS tracker,etc
• LoRaWAN Repeater

Specifications

Linux Side:

• Processor: 400MHz, 24K MIPS
• Flash: 16MB ; RAM: 64MB
• Cellular 4G LTE (optional):
• Quectel EC25 LTE module (Clink the linkenter link description here to find the right model for your region)
• Micro SIM Slot
• Internal 4G Antenna + External 4G Sticker Antenna.
• More info about valid bands, please see EC25-E product page
• Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage

MIMO technology meets demands for data rate and link rUp to 100Mbps downlink and 50Mbps uplink data rates reliability in modem wireless communication systems

Interfaces:

• 10M/100M RJ45 Ports x 2
• WiFi : 802.11 b/g/n
• LoRa Wireless
• Power Input: 12V DC
• USB 2.0 host connector x 1
• USB 2.0 host internal interface x 1
• 1 x LoRa Interface

Info

LG01-XXX-YY

XXX: Frequency Band

• 433: For Bands: EU433, CN470
• 868: For Bands: EU868,IN865
• 915: For Bands: US915,AU915,AS923,KR920
• YYY: 4G Cellular Option
• EC25-E: EMEA, Korea, Thailand, India.
• EC25-A: North America/ Rogers/AT&T/T-Mobile.
• EC25-AU: Latin America, New Zeland, Taiwan
• EC25-J: Japan, DOCOMO/SoftBank/ KDDI

Shipping Notice: Note: Prices are exclusive of local taxes and import duties.