OLG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, Or 3G/4G cellular via optional LTE module. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

OLG01-N has rich internet connection method such as WiFi interface, Ethernet port and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to Internet.

OLG01-N can support Limited LoRaWAN protocol in single frequency and customized LoRa transmit protocol. Different from OLG01, OLG01-N use the Linux to directly control the sx1276/sx1278 LoRa module which increase the communication efficiency and simplify the software design.

OLG01-N can be used to provide a low cost IoT wireless solution to support 50~300 sensor nodes.

Except LoRaWAN mode, LG01-N can support mutiply working mode such as: MQTT mode, TCP/IP Client mode to fit different requirement for IoT connection.

LG01-N base on sx1276 solution which provide a low cost for your IoT network connection. Compare to the cost with normal SX1301 LoRaWAN solution. the LG01-N is only of its 1/4 or less cost. This make the OLG01-N very suitable to set up small scale LoRa network.

*Limitation of LoRaWAN support please refer section 3.6.2 of this linkenter link description here.

For Private LoRa Protocol, Not recommend for LoRaWAN use.

**System Overview**

LG01-N

Features Features:

Open Source OpenWrt system
Low power consumption
Firmware upgrade via Web
Software upgradable via network
Flexible protocol to connect to IoT servers
Auto-Provisioning
Built-in web server
Managed by Web GUI, SSH via LAN or WiFi
Internet connection via LAN, WiFi, Or 3G/4G via optional LTE module
Failsafe design provides robustly system
1 x SX1276/SX1278 LoRa module
Limited support in LoRaWAN/ Support Private LoRa protocol
Support upto 300 nodes
LoRa band available at 433/868/915/920 Mhz
Max range in LoRa: 5~10 km. Density Area:>500m

Applications:

Wireless Alarm and Security Systems
Home and Building Automation
Automated Meter Reading
Industrial Monitoring and Control
Long range Irrigation Systems
GPS tracker,etc
LoRaWAN Reapeter

Specifications: Specifications: Linux Side:

Processor: 400MHz, 24K MIPS
Flash: 16MB ; RAM: 64MB

Cellular 4G LTE (optional):

Quectel EC25 LTE module (Clink the link[enter link description here](https://www.quectel.com/product/ec25.htm) to find the right model for your region)
Micro SIM Slot
Internal 4G Antenna + External 4G Sticker Antenna.
Up to 100Mbps downlink and 50Mbps uplink data rates
Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

Interfaces:

10M/100M RJ45 Ports x 2
WiFi : 802.11 b/g/n
LoRa Wireless
Power Input: 12V DC
1 x LoRa Interface

DocumentsOrder

Datasheet
User Manual
Source Code: hardware: MotherBoard,LoRa module, software
Dragino LoRa Gateway Selection Guide

Info OLG01-N-XXX-YY

XXX: Frequency Band

433: For Bands: EU433, CN470
868: For Bands: EU868,IN865
915: For Bands: US915,AU915,AS923,KR920

YYY: 4G Cellular Option

EC25-E: EMEA, Korea, Thailand, India.
EC25-A: North America/ Rogers/AT&T/T-Mobile.
EC25-AU: Latin America, New Zeland, Taiwan
EC25-J: Japan, DOCOMO/SoftBank/ KDDI

More info about valid bands, please see EC25-E product page

Shipping Notice:

• Note: Prices are exclusive of local taxes and import duties.