Important: Due to the shutdowns in the Federal Revenue, which have been ongoing since November 2023, we are temporarily suspending our exports to avoid potential issues such as delays and lost orders.

IMPORTANT: we ship all our items from Brazil via priority mail or express mail (EMS), and the customer is responsible for customs release and any import duties that may be due in the destination country.

Product Information

Versions

There are two versions of the Triac Nanoshield. This is the 25mm heatsink version, supporting currents up to 2.5A. Check our store for the bigger 50mm/5A version.

Highlights

• Control of AC loads in 127V and 220V
• Can handle currents up to 2.5A (see the current graph)
• Activation with 5V or 3.3V, through an optocoupler
• 4 options for the output pin to use, selectable by manual jumpers, and 7 additional pins selectable by solder jumpers
• LED indicating if the triac is on or off

CAUTION

This module was designed to connect directly to the AC grid power, and its misuse might cause ELECTRIC SHOCK and FIRE. Only use this module if you already have prior experience with mains AC circuits, and carefully follow the safety recommendations at the bottom of this page.

Description

The Triac Nanoshield can be used to control appliances connected to the power grid in 127V or 220V AC (alternating current) using the I/O pins of your Arduino. Is is ideal for applications like:

• Lamp switching or dimming (also check the Zero Cross Nanoshield).
• Control of home appliances like table lamps, electric ovens, coffee makers, fans, etc.
• Control of electric gates

There are 4 options of I/O pins to activate the triac (D3#, D5#, D6# e D9#), which can be easily selected using jumpers on the board. In case these four options are not enough, there are 7 more options that can be selected by solder jumpers at the bottom side of the board (D2, D4, D7, A2, A3, A4 e A5). The triac is activated when there is a high logic level on the corresponding I/O pin, and deactivated when the there is a low logic level on the pin.

The triac is activated via an optocoupler and the triac lead that is kept in contact with the heatsink is internally isolated. This keeps the AC voltage away from the microcontroller and other DC circuits.