The Enapter ENP-RS232-MPP Module can be added to your current renewable energy setup to compliment your serial protocol enabled inverter with the advanced management and monitoring features you are missing.

Main Features:

- Mobile App

With the Enapter extension your inverter can be monitored through a convenient mobile application. No need for an extra computer to control and configure the inverter: everything available over the app.

- Cloud storage and web charts

Free and unlimited cloud-based data storage is included. All the data will be carefully stored and available on the go. Use multiple filters and display data by minutes or even seconds.

- Charger management

Dynamic set for charger and output source priority based on time schedule or battery voltage threshold. You can change it manually or pre-set battery charge source from Utility Grid to Solar PV or Battery from your mobile dashboard.

- Fully autonomous work

The module is offline friendly. Schedule and voltage threshold rules are respected while no Internet. It can be powered from inverter directly from the battery if needed.

More specs:

• Cloud storage for all data with 1s interval;
• Mobile and Web charts displays AC voltage, DC voltage, PV voltage / current, Battery discharge current, State of charge, Output voltage / current, Grid voltage, Grid frequency;
• Support Wi-Fi 2.4 Ghz Communication, SMA-F port for external antenna;
• Seamless Firmware updates over Internet (OTA);
• Android / iOS mobile companion application;
• Instant push notifications about issues;
• RJ-11 - RJ-45 50cm cable;
• Battery self-powered (8-48V);
• Offline mode;
• DIN rail mount, 1 module size.