Capture position, speed and acceleration.

This is easiest way with plug and play software! Small and powerful.

You can freely edit firmware. Download all source codes on github repo!

Useable remotely with cable or wireless systems. Easly applicable with bluetooth or wifi boards. Flexible interface!

General

This device help you to capture motion metrics. You can use this product your research and hobby projects.

You can free access code samples and you can improve data acquisiting algorithms.

Product is will be ship with 50 cm cable. You can use whatever you want.

Features and Specifications

• STM32F030F4P6 32-bits, 48 MHz, ARM M0, 16 Kb Flash, 4 Kb RAM
• LIS3DSH ultra-low-power high-performance three-axis "nano" accelerometer
• ±2g/±4g/±6g/±8g/±16g
• 16-bit data output

Applications

• Motion-controlled user interface
• Gaming and virtual reality
• Pedometers
• Intelligent power saving for handheld devices
• Display orientation
• Click/double-click recognition
• Impact recognition and logging
• Vibration monitoring and compensation

Quick Start

This product is going to ship with demo firmware. This firmware reads raw data and sends from UART or RS-485. You connect interface and capture data. This is it! If you want to develop, you can edit firmware code. All codes in github repository.

Product Options

Communication Interface

You can select direct UART interface (3.3 V) or RS-485 Interface.

If you buy RS-485 version and If you want to use UART mode, you can change to UART interface by change only two 0 R resistor. So RS-485 version is recommended.

UART interface suitable for direct use with computer. RS-485 interface suitable for direct or remote use. You can mount the MIMU different points and you can data acquisition. For example you can do building healt monitoring with RS-485 bus.

If you want to use with bluetooth, you can use HC-05, HC-06 like interfaces directly.

You can connect to internet with ESP8266, ESP32 like WiFi boards.

You can track human movement with MIMU wireless options.

Box

Plastic, fabricated, durable 3D box/case. This box is save your MIMU from ESD, environmental effects. This is recommended option. Box size 35mm, 50mm, 15mm.

Details

Pin Definitions

You can directly access and create your custom project with following file in the repo.