Perfect companion for your Flipper Zero. ESP32 with WiFi, BT/BLE, micro-SD, camera+PSRAM, flashlight and extras: NRF24/CC1101, 3V/5V sensors
Designed by Erwin Ried in Norway
This product is no longer available for sale.
The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.
About v1 vs v2 This version (v1) has support for sensors and allow one external module at the same time. If you want BOTH functionalities in ONE BOARD, you might consider Mayhem v2 instead. …
Read More…| About v1 vs v2 |
|---|
| This version (v1) has support for sensors and allow one external module at the same time. If you want BOTH functionalities in ONE BOARD, you might consider Mayhem v2 instead. |
| Version | Release | Details |
|---|---|---|
| v1.4.4 | oct 2023 | Small changes on the silkscreen |
| v1.4 | jun 2023 | Added support for 4 pin sensors and small layout improvement. Enhanced ground planes under the ESP32 antenna and NRF24/CC1101 modules |
| v1.3 | march 2023 | Small layout improvement and sharing the design with other makers |
| v1.2 | feb 2023 | Slimmer design |
| v1.1 | jan 2023 | First version |
| ____ |
I was looking for an accesory to buy for my flipper zero, but none was complete enough... I had to design the best, ultimate, all-in-one accesory; this is it.
Has an ESP32 which is superior to any ESP8266. This is the ESP32 with bluetooth, not like some of the S versions.
Includes a camera and a powerful flashlight. The camera is more than a gimmick, it works as a camera but it can also work as a complex input, detect movement, read codes.
You get an expansion slot for an external radio or NRF24, with many antenna options and different form factors.
There is a mini prototyping area for almost any type of 3 pin sensor.
Check below all the functionality you get. Besides, you can make your own or support the project buying a kit or assembled unit. This helps to make more apps and extend the functionality of the board.
Not to be confused with Portapack Mayhem, but from the same family. The idea is to provide a colaborative environment where people contribute with the development of the board.
The module is designed to be flip-able, making it easy to point the camera back or forward. Check out the image below to get a better idea of the design:
Works perfect (thoroughly tested) on the Flipper Zero and ESP32. Will hold the equivalent of thousand photos from the OV2640 Camera. Exquisitely exclusive custom design.
To set up your Flipper Zero and the module firmware, simply follow https://flipper.ried.cl/webinstaller.
This will give you access to the following features:
Depending on your Flipper Zero firmware, you also need other .fap apps for:
Check also:
Video with some functionality (previous v1.1 hardware): https://youtu.be/KbBgIg76SMw
Extra module (header), one of:
NRF24l01 (module) (alternative: w/SMA antenna) (alternative: w/IPX antenna interface)
CC1101 (w/coil antenna) (alternative: w/SMA antenna)
Extra pins for connecting sensors and prototyping: any 3 pin sensor, 3V or 5V with any pin order can be connected easily
/i/09189/products/2023-05-05T18%3A04%3A49.127Z-IMG_20230505_200424.jpg?1683284745)
.stl file) (tpu filament)IMPORTANT: If you order extra PCBs, you need to buy the parts individually from the links on the list.
Join in on the fun and contribute to the development. You could add new functionality, such as:
$109.00
$132.00
$99.99 $119.99
$69.00
