This is a clock hand built and designed to be inexpensive and accurate. It connects to your WiFi and obtains accurate time from internet NTP servers.

Here are some features:

• Full customization for time zones: You can change the offset for Daylight savings or Std (or none at all) and when it starts and stops
• Displays Hours, Minutes, Seconds, Tenths, Hundredths of seconds
• WPA2 Security
• Easy setup up: Press the setup button within 5 seconds of power-on to force into AP mode. Connect to ESP-CLOCK-XXXXX and go to http://192.168.4.1 to configure Wifi settings
• Password protected: Unique to each ESP card, displayed on power on
• Firmware updates: Can be updated by user remotely
• Fine adjust: Can tune clock by seconds
• Customization for NTP Server and sync interval (minimum of 60 seconds)
• Displays signal strength, last sync, first sync times
• Dim the display for night time
• Can run off of a standard USB Charger power supply
• Can change between 12 and 24 hour mode
• Open source code: https://github.com/ntsecrets/espclock/wiki
• Handles Leap Seconds

Included: 1 Fully Assembled NTP Clock as pictured and 1 6' USB cable to provide power. Customer provides generic USB charger.