The LSM9DS1 is a system-in-package featuring a 3D digital linear acceleration sensor, a 3D digital angular rate sensor, and a 3D digital magnetic sensor. The LSM9DS1 has a linear acceleration full scale of ±2g/±4g/±8/±16 g, a magnetic field full scale of ±4/±8/±12/±16 gauss and an angular rate of ±245/±500/±2000 dps. The LSM9DS1 includes an I2C serial bus interface supporting standard and fast mode (100 kHz and 400 kHz) and an SPI serial standard interface. Magnetic, accelerometer and gyroscope sensing can be enabled or set in power-down mode separately for smart power management.

Specifications:

• Input Voltage: 2.5V to 5V
• 5V Ready IOs: Level shifted IO lines for easy interfacing to incompatible voltage boards
• Digital Output: Inter Integrated Circuit (I2C/IIC) or Serial Peripheral Interface (SPI)
• Regulator Pin - Provides 3.3V Out at 150mA (when 3.6V < VIN < 5V) else provides voltage ~equal to VIN
• Dimensions: 20.4 mm x 20 mm
• Weight: 4 grams

Features of Explore Labs 3D Accelerometer + 3D Gyroscope + 3D Magnetometer LSM9DS1 Breakout Board 5V Ready with Voltage Regulator:

• Wide supply voltage - 2.5V to 5V
• Level shifted IO lines for easy interfacing to high voltage boards like Arduino Uno, Mega, Leonardo, etc.
• All important pins of the LSM9DS1 sensor are available like I2C and SPI communication interfaces as well as INT1 and INT2 Interrupt pins
• Layout takes care of keeping the area below the sensor free from any active current carrying trace or a power or ground plane
• Capacitors with low ESR characteristics are used for decoupling on both VDD and VDDIO power inputs
• Open Source Hardware
• Designed, Assembled and Made in India

Key Features of LSM9DS1 IC

• Input Voltage - 2.5V to 5V
• 5V Ready IOs - IO Pins are comaptible with 5V
• 3V Out Pin - Provides 3.3V Out at 150mA
• 3 acceleration channels, 3 angular rate channels, 3 magnetic field channels
• ±2/±4/±8/±16 g linear acceleration full scale
• ±4/±8/±12/±16 gauss magnetic full scale
• ±245/±500/±2000 dps angular rate full scale
• 16-bit data output
• SPI / I2 C serial interfaces
• Analog supply voltage 1.9 V to 3.6 V
• “Always-on” eco power mode down to 1.9 mA
• Programmable interrupt generators
• Embedded temperature sensor
• Embedded FIFO
• Position and motion detection functions
• Click/double-click recognition
• Intelligent power saving for handheld devices

Technical Details:

• LSM9DS1 Datasheet