Overview

The MultiBoard is a small tab that contains the basic functionality of a PIC32MX460F512L

Details

The card is designed to be used in projects to test / rapid prototyping, providing a set of signals / function typically used in the development of embedded applications.

The board has two 40-pin expansion connectors each to use the signals made ​​available by the microcontroller.

Some features on the card:

• Power In : external or battery or USB connector
• Power available on board : 1.8v / 3.3v / 5v (if external power applied)
• Connector for MicroSD card
• Main Crystal 8Mhz
• RTCC Crystal Clock (optional)
• MicroUSB connector
• Programming connector (ICSP for Pickit2/3)
• Reset Button
• 2 LED for general use
• SPI Serial Flash Memory SST25VF016B 16Mbit / 80 Mhz
• SPI Serial memory Serial Electrically Erasable PROM 256Kbit / 10 Mhz
• PIC32MX460F512L (80MHz, 512k Flash (+12 k Boot), 32k RAM)

The connector 2, has all the control signals for LCD Display + Touch + power

Power input can be applied from USB connector or Battery connector (only for 3.3v/1.8v), from external power (input max 15v), you can get 5v/3.3v/1.8v

(Cards are available to interface TFT LCD and a controller for reflow oven)

Board version 1.3g

http://rlabs.sytes.net/wordpress/?page_id=49

Usage

you can use this card for test prototypes, control motors/displays, and many other things, personally i have used this card to start prototype of domotic circuits and for my DIY reflow oven (Short also am going to publish this board) I provide the headers, but not soldered on the board.