Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero

Name: Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero
SKU: 36819
Price: 109.99 USD
Availability: InStock

Sacred Labs FlipMods UltraV3 3in1 Wifi Dev Board with ESP32, NRF24, CC1101 and 3D Printed Case for Flipper Zero

Designed by FlipMods in United States of America

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 1

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 2

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 3

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 4

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 5

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 6

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 7

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 8

Ultra V3 ESP32/NRF24/CC1101 3in1 for Flipper Zero 9

2024-12-21T15:36:23.041Z-Tindie Thumbnail.jpg

2024-12-11T08:51:45.340Z-Parts_UltraV3.jpg

2024-12-11T08:54:15.902Z-ULTRAOVERVIEW.png

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Sacred Labs FlipMods UltraV3 3in1 Wifi Dev Board with ESP32, NRF24, CC1101 and 3D Printed Case for Flipper Zero

-UltraV3 board with 3D printed case and has the ESP-WROOM-32, NRF24, and CC1101. The ESP32 is used for Marauder applications and will come preloaded with Marauder. The NRF24 is used for NRF sniffer applications. CC1101 used with the 433MHz antenna will help increase the range of transmission/reception of the subghz radio signal.

-WiFi Dev Board plugs into the GPIO pins of the flipper zero. Designed to fit even if you’re using the official flipper zero silicone case on the device. Includes a pin cover.

-Use [ESP32] WiFi Marauder to take advantage of the ESP32. Don’t turn on 5V since all components are running on 3.3V.

-ESP32 antenna is located back right. NRF24 antenna is located back middle. CC1101 antenna is located left. Please use the correct antennas for each one. 433MHz for the CC1101 and 2.4GHz for the ESP32 and NRF24.

-There is a USB-C port on the board to use for the ESP32 so you could update the firmware.

-What's included: Antennas (1x 433Mhz and 2x 2.4Ghz), 3D Printed Case and Ultra V3.

-3D printed using PETG in a Bambu Labs X1-Carbon.

Flipper Zero is not included
Do NOT unplug modules that are in use
You will need applications/firmware (Such as Momentum, Unleashed, RogueMaster or Xtreme) to support marauder and NRF24 tools on your Flipper Zero.