This is a breadboard prototyping Cape for the Beaglebone black (and white of course). If you want to maximise your prototyping area while keeping a convenient for factor and short wires this Cape is for you.

The principal features of this Cape are:

• The breadboard I sell are cut to perfect sizes to maximize the prototyping area.
• The Cape layout closely matches the breadboard layout, so it is very easy to convert a prototype on breadboard to a final circuit
• The Serial connection is available even with a breadboard.
• A voltage conversion to 1.8 volts is available for safe analog input
• There are extra pins to solder a SOT23 on top or SOIC8 on the bottom side
• Option 1 Cape comes with an RGB LED (470 Ohm resistors), and a push button ready to use (see connection diagram)
• Option 2 has a real half size breadboard, only one power rail and a few millimetre are removed.
• Looks good in black with gold platting!

Note:

• The Cape 2x25 pins and serial pins are part of the kit but not soldered to the board to make shipping easier
• Of course a customised breadboard as described above is included with the cape.
• I also sell bare circuit boards and pins if you need extra.