10DOF MPU9250+MS5637 sensor addon, Teensy 3.0-3.2

Name: 10DOF MPU9250+MS5637 sensor addon, Teensy 3.0-3.2
SKU: 7232
Price: 23.00 USD
Availability: OutOfStock
Rating: 2.50 (1 reviews)

(1 Review)

Accellerometer (3 axis), gyro (3 axis), compass (3 axis), altimeter addon board

Designed by Fusion Tech in Czechia

10DOF MPU9250+MS5637 sensor addon, Teensy 3.0-3.2 1

10DOF MPU9250+MS5637 sensor addon, Teensy 3.0-3.2 2

10DOF MPU9250+MS5637 sensor addon, Teensy 3.0-3.2 3

2016-05-05T08:47:13.107Z-FullSizeRender.jpg

$23.00

Out of Stock

Sold out since Sep 22, 2021

Accellerometer (3 axis), gyro (3 axis), compass (3 axis), altimeter addon board

What is it? This 10DOF addon includes Invensense's MPU9250 and Measurement Specialties MS5637 pressure sensor. The board is an addon for Teensy 3.1/3.2. Why did you make it? It is a wonderful compani…

What is it?

This 10DOF addon includes Invensense's MPU9250 and Measurement Specialties MS5637 pressure sensor. The board is an addon for Teensy 3.1/3.2.

Why did you make it?

It is a wonderful companion to the GSM/GPS board for Teensy (found here). As a simple example: with this addon the GSM board can inform you that the tracked object is being tampered with, but many other use cases are possible.

What makes it special?

The board's 0.6mm thickness and tiny size allows it to be placed on the bottom of the Teensy without adding space between the Teensy and GSM/GPS board. It is totally discrete and uses a only a few of the bottom-middle pins. Included sensing: - 3 axis accellerometer - 3 axis gyro - 3 axis compass - Altimeter (height above sea level)

Each board comes pre-tested and known to function properly. * Teensy not included *

No country selected, please select your country to see shipping options.

Change Destination Country:

Review Breakdown

Average Ratings

Product: (5.00)

Documentation: (2.00)

Shipping: (2.00)

Communication: (1.00)

Andreas | April 4, 2017

Good product, no communication

Cool product, good quality but shipping&communication not great.
Seller didn't communicate so I had to open Paypal-case (with Tindie as 3rd party) and then the product was shipped (almost 2 weeks after payment).
Couldn't find any documentation so it took some trial&error to find the correct I2C configuration.
I used Kris Winer's great example (https://github.com/kriswiner/MPU-9250/blob/master/MPU9250_MS5637_AHRS_t3.ino) to get started. Beware, you need to change all "Wire" to "Wire1" and I2C PINs to 'I2C_PINS_29_30' (SCL1&SDA1) and set the interrupt pin to 31.

$23.00