Package includes:

5 x Naked Mega 4

1 x 6ft. USB-C data cable length between 3-6ft.

*Version 4 updates -Connector changed to USB-C header instead of USB-Mini.

Naked Mega 4 is an Arduino Mega 2560 compatible board based on the ATmega2560-16AU microcontroller, build with minimalist design and form factor; build process documented on Instructables.

This version has an onboard CP2102 UART to TTL converter, ready to upload sketch and program with Arduino IDE with USB-C cable; converter requires a CP2102 driver which can be downloaded from Silicon Labs here.

• Dimension: 38.1mm x 38.1mm.
• To use the onboard AREF/REF pin, a 0.1uF capacitor must be connected between the REF pin and GND.
• Does not have 10k pull-up resistors on the I2C pins
• Must be powered by 5V DC regulated voltage.
• On-chip 3.3V DC voltage regulator.
• 512 bytes receiver and transmit buffer.
• Supports Windows 98SE, 2000, XP, Vista, Windows7, Mac OS 9/OSX, Linux 2.40.
• Hardware or X-On/X-Off handshaking support.
• Baud rates: 300 bps to 1.5 Mbps.